Brother MFC-J6920DW User Manual page 124

Error Message
Disconnected
Document Jam/too Long The document was not inserted or fed
DR Mode in Use
High Temperature
Hub is Unusable.
Image Too Long
Image Too Small
110
Cause
The other person or other person's
fax machine stopped the call.
correctly, or the document scanned
from the ADF was too long.
The machine is in Distinctive Ring
mode. You cannot change the
Receive Mode from Manual to
another mode.
The room temperature is too high.
A hub or USB Flash drive with hub
has been connected to the USB direct
interface.
The proportions of your photo are
irregular so effects could not be
added.
The size of your photo is too small to
trim.
Action
Try to send or receive again.
If calls are stopped repeatedly and
you are using a VoIP (Voice over IP)
system, try changing the
Compatibility to Basic(for VoIP).
(See Telephone line
interference / VoIP on page 139.)
(See Using the ADF on page 45.)
(See Document jam on page 119.)
Set Distinctive Ring to Off. (See
Turning off Distinctive Ring
on page 66.)
After cooling the room, allow the
machine to cool down to room
temperature. Try again later.
Hubs, including a USB Flash drive
that has a hub built in, are not
supported. Unplug the device from
the USB direct interface.
Choose a regularly proportioned
image.
Choose a larger image.