NEC Versa Dock Installation Manual page 4

not squeeze the drive by the top and bottom. Do not push on the top and bottom of the drive.
To eliminate static discharge, touch a grounded metal object while handling the hard disk drive.
Reverse the procedure to install your new hard disk drive in the system's internal bay. Use
the screw you removed at the beginning of this procedure to secure your new hard disk
drive.
Installing the Drive in the Cradle Pack
Use the following steps to install the hard disk drive in the cradle pack.
1. Place the cradle pack as shown in the figure in step 2. The side with the screw that secures
the hard disk drive is facing up.
2. Remove the screw.
4 NEC Versa LX, LXi, and NEC Versa Dock Hard Disk Drive Cradle Pack
Use care when handling the hard disk drive. Hold it from the sides, do
Lifting the drive out of the bay
Removing the screw
A — Screw