Functional Description - Black & Decker BDH1220AV Instruction Manual

WARNING:
Risk of Fire. Do not replace any vehicle fuse with a rating higher than
recommended by the vehicle manufacturer. This product is rated to draw 10 amperes
from a 12V vehicle outlet. Ensure that the electrical system in your vehicle can supply this
product without causing the vehicle fusing to open. This can be determined by making sure
the fuse in the vehicle which protects the outlet is rated higher than 10 amperes.
Information on the vehicle fuse ratings are typically found in the vehicle operator's manual.
If a vehicle fuse opens repeatedly, do not keep on replacing it. The cause of the overload
must be found. On no account should fuses be patched up with tin foil or wire as this may
cause serious damage elsewhere in the electrical circuit or cause fire.
SAVE THESE INSTRUCTIONS
Symbols
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................volts
Hz ................hertz
min ..............minutes
............direct current
................Class I Construction
(grounded)
................Class II Construction
(double insulated)

Functional Description

1. On/off switch
2. Bowl release button
3. Dust bowl
4. Nozzle
5. Nozzle release button
6. 12V car connector
7. Large brush head
8. Large crevice tool
9. Flexible hose
A ...................amperes
W ..................watts
................alternating current
n o .................no load speed
..................earthing terminal
................safety alert symbol
.../min or rpm...revolutions or reciprocation
1
2
3
5
4
6
3
per minute
7
8
9