Alarm Activated Pre-Position; Sample Alarm Responses - Bosch LTC 8500 Instruction Manual

15.5 Alarm Activated Pre-position

15.6 Sample Alarm Responses

Alarm activated pre-position capability exists in each of the three (3) alarm response
modes. This enables a pan/tilt/zoom equipped camera to automatically position
itself to a preprogrammed scene as a result of an alarm signal. When using conven-
tional pan/tilt equipped devices and zoom lenses, they must have the necessary
options for pre-position control. The system default is to activate pre-position #16
of the system camera receiving an alarm. Using the optional LTC 8059/00 MCS
package or the optional LTC 8850/00 GUI Software package, the user can config-
ure a response to alarms as required.
Basic Mode
In the Basic alarm response mode, cam-
eras are individually armed for each
alarm monitor.
MONITOR
MONITOR
2
1
Alarm Status Alarm Station Display
st
1 Alarm Video associated with 1
alarm is displayed on any or
all appropriately armed
monitors.
nd
2 Alarm Video associated with 2
alarm is displayed on any or
all appropriately armed
monitors.
rd
3 Alarm Video associated with 3
alarm is displayed on any or
all appropriately armed
monitors.
Monitors and their respectively armed
cameras are programmed individually.
Multiple alarms on monitors are
sequenced automatically.
Alarmed video remains on monitors for
duration of alarm input signal.
Alarm Activated Pre-position
Auto-Build Mode
In the Auto-Build alarm response mode,
alarms "build-up" on armed monitors as
new alarms are received.
1
2
9
MONITOR
MONITOR
MONITOR
2
1
8
LTC8500BasicMode.eps
Alarm Status
st st
1 Alarm
nd nd
2 Alarm
rd rd
3 Alarm
.
.
.
th
8 Alarm
th
9 Alarm
Any number of monitors may be armed.
Multiple alarms on monitors are
sequenced automatically. Alarm video
remains on monitors for duration of
alarm input signal.
8
MONITOR
8
LTC8500AutoBuild.eps
Alarm Station Display
Video associated with
st
1 alarm is displayed
on monitor # 1 (if
armed).
Video associated with
nd
2 alarm is displayed
on monitor # 2 (if
armed).
Video associated with
rd
3 alarm is displayed
on monitor # 3 (if
armed).
Video associated with
th
8 alarm is displayed
on monitor # 8 (if
armed).
Video associated with
th
9 alarm is sequenced
with video of 1st alarm
on monitor # 1.
EN | 41