Installing The Monitor; Ventilation; Installing Accessories; Wall Mount Installation - Bosch UML-463-90 User Manual

High Performance HD LED Monitor
5

Installing the Monitor

This chapter outlines the procedures to install the monitor. A qualified service person should
install the monitor and adhere to all local codes.
5.1

Ventilation

To prevent overheating, ensure the ventilation openings on the rear of the monitor are not
covered.
5.2

Installing accessories

The monitors are designed to be mounted to a wall using mounting accessories that are sold
separately. The monitor can also be placed on a desktop using mounting desktop stands that
are also sold separately. See the following chapters for the relevant installation descriptions.
If necessary, refer to the Bosch Security Systems, Inc. Web site or contact your local customer
support representative for more information.
5.2.1

Wall mount installation

The monitor can be wall-mounted using the mounting holes and a suitable wall mount or
swivel/tilt mount. Use UL Listed mounting standards, and ensure the mounts are strong
enough to bear the weight of the monitor. Refer to the following figure for the dimensions of
the wall mounting holes.
400 mm
Figure 5.1: Wall mounting
5.2.2

Desktop Installation

Connect the two stands to the base of the monitor as follows:
1.
2.
Bosch Security Systems
Ensure that the power to the monitor and other attached devices are turned off.
Place the monitor with its front facing downward on a soft cloth.
400 mm
User Manual
Installing the Monitor | en
2013.07 | v1.0 | F.01U.286.147
17