Chapter 2
Installing the Camera
Attach the black cover to the camera.
Step 4
Mounting to the Wall
You can connect the PTZ IP camera to the wall using the following accessories:
•
•
Connecting to the Mount Bracket
Use these steps to connect cables to the mount bracket.
Press the seal ring into the groove on canister.
Step 1
Step 2
Secure the dome cap to the mount bracket.
Step 3
Use the included hex wrench to secure the connection.
You can now carry the camera and the top section to the installation site.
OL-28954-01
Goose neck for wall mount—CIVS-6KA-GNECK=
Adaptor—CIVS-PA-PTZADPTR=
Use the black machine screws (M4x8) to attach the interface section to the dome cap.
3
2
1
Cisco Video Surveillance PTZ IP Camera Installation Guide
Installing the PTZ IP Camera
2-7