Modify Channel; Program Table; Timer Setting Menu - Sanyo DVR-SD450 Operating Instructions Manual

2.1.4 MODIFY CHANNEL

It enables to modify last tuned analogue channel settings. You can select "Search Type" and "Band" or edit
the "Name" field. The "Standard" item will be refreshed according to the tuned channel's setting. With
"Channel" / "Frequency" field, you can directly enter the channel number / frequency or press arrow keys to
do manual tuning.
When you select "Standard" option from "Band" field, it starts scanning with C-Band and it does not pass to
S-Band after tunning C-Band. If you select "Cable" option, it starts scanning with S-Band and it scans both S-
Band and C-Band analogue channels.
NOTE: This menu item will be active only in monitor mode.

2.1.5 PROGRAM TABLE

2.1.6 TIMER SETTING MENU

You can view or sort all stored programs by using this menu item.
You can access Modify Channel menu (see 2.2.1.4) by pressing
Select button on Program Table.
NOTE: This menu item will be active only in monitor mode.
You can list all pre-set timer records, edit on stored record list or set
the timer for a new recording by using this menu option. This menu
can also be activated by TIMER key on the remote control.
If you press SELECT on the first blank item an additional menu will
appear on screen. For detailed information, please look at section 6.
25