Screensaver (For Preventing Image Retention); Function Selection - Panasonic TH-50PB2U Operating Instructions Manual

SCREENSAVER
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
1
Select "SCREENSAVER" in "SETUP" menu and press
2

FUNCTION selection

3
MODE selection
4
START setting
(For preventing image retention)
Press to select the FUNCTION.
Press to select the desired function.
NEGATIVE IMAGE
WHITE SCREEN OVERLAY SCROLLING BAR
NEGATIVE IMAGE
SCROLLING BAR ONLY : A white bar will scroll from left to right. The image won't be displayed.
OVERLAY SCROLLING BAR : The brightness of the image will be decreased and a white bar
WHITE SCREEN
Note: OVERLAY SCROLLING BAR is not effective during two screen display.
Press to select the
MODE.
Press to select each
mode items.
When the MODE is set to ON, press to select START.
Press to start SCREENSAVER.
The menu screen will disappear and the SCREENSAVER will be activated. To stop the
SCREENSAVER under ON, press the R button or any buttons on the main unit.
Note: When the display is turned off, the SCREENSAVER will be deactivated.
button.
SCROLLING BAR ONLY
: A negative image will be displayed on the screen.
will scroll on it.
: The whole screen will be white.
STANDBY AFTER SCR SAVER : Operates while SCREENSAVER DURATION,
and display enters standby mode.
ON : Operates when START is selected and the
ACTION ( ) button is pressed.
OFF
INTERVAL : Operates when SHOW DURATION and SAVER
DURATION are set up and those times arrive.
TIME OF DAY : Operates when START TIME and FINISH TIME
are set up and those times arrive.
SCREENSAVER
TIME 99:99
START
SCROLLING BAR ONLY
FUNCTION
STANDBY AFTER SCR SAVER
MODE
39