HP 7500 Quickspecs page 47

QuickSpecs
Technical Specifications
Ports
Power supplies
Fan tray
Physical characteristics
Memory and processor
Mounting
Performance
Reliability
Environment
Electrical characteristics Frequency
Safety
Emissions
2 switch fabric slots
10 I/O module slots
Supports a maximum of 84 10GbE ports or 480 autosensing 10/100/1000 ports or 480 SFP ports, or a
combination
2 power-supply slots
1 minimum power-supply required (ordered separately)
includes: 1 x JD216A
1 fan tray slot
Dimensions
Weight
Fabric
I/O Module
Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); horizontal surface
mounting only
Throughput
Routing/Switching
capacity
Routing table size
MAC address table size
Availability
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
Description
Voltage
DC Voltage
Current
Power output
Notes
UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11
VCCI Class A
EN 55022 Class A
ICES-003 Class A
ANSI C63.4 2003
AS/NZS CISPR 22 Class A
DA - 13805 North America — Version 29 — December 9, 2013
17.17(w) x 16.54(d) x 27.87(h) in (43.6 x 42.0 x 70.8 cm) (16U height)
211 lb (95.71 kg), Fully loaded chassis, two fabrics, two power supplies, and a
full complement of typical I/O modules
MIPS64 @ 600 MHz, 64 MB flash, 512 MB RAM
MIPS64 @ 400 MHz, 512 MB RAM
714 million pps
1152 Gbps
256000 entries (IPv4), 8000 entries (IPv6)
512000 entries
99.999%
32°F to 113°F (0°C to 45°C)
10% to 95%, non-condensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, non-condensing
Low-speed fan: 53.5 dB, High-speed fan: 56.7 d
50/60 Hz
100-120/200-240 VAC
-48 to -60 VDC
16/50 A
1400 W
Based on a common power supply of 1400 W (AC/DC)
HP 7500 Switch Series
Page 47