1. Manuals
  2. Brands
  3. HP Manuals
  4. Server
  5. ProLiant DL2000
  6. Specification

HP ProLiant DL2000 Specification

Hp proliant dl2000 multi node server
Hide thumbs
Table of Contents

Advertisement

Quick Links

QuickSpecs
Overview
The DL2000 is optimized for efficiency, density and flexibility and a server node can be serviced individually without impacting the
operation of other server nodes sharing the same chassis. The DL2000 consists of up to 4 independent DL170e G6 servers in the 2U HP
ProLiant e2000 G6 Chassis. The servers share power supplies and fans, providing greater power and cooling efficiencies.
The DL2000 was designed to double the density to maximize data center floor space, increase performance while lowering energy
consumption and provide flexible configurations that fit into existing industry standard racks.
Each DL170e G6 server node supports up to two Intel® two processors and 16 DDR3 DIMM sockets. The DL170e G6 provides all of the
features expected in an enterprise server, including essential management features (LO100i) and Easy Setup for rapid deployment, but
at a low cost.
Front View:
1.
1U Node PCIe Riser - Low Profile PCIe x16 Gen2 Slot
2.
Intel® Xeon® 5500 or 5600 series processors (supports up to
two per node)
3.
Common Slot Power Supply (two supported per chassis)
4.
4 x 80mm system fans
5.
Standard Right Power Buttons, Chassis UID, Health LEDs
6.
Standard Left Power Buttons, Health LEDs
7.
16 DDR3 DIMM slots
What's New
Support for new options
4 Node 24 SFF HDD Model Illustrated
DA - 13847 North America — Version 31 — December 13, 2013
HP ProLiant DL2000 Multi Node Server
Rear View:
1.
Common Slot Power Supply
2.
Power supply cable socket
3.
Low-Profile PCI Express x16 Gen2 slot
4.
Optional dedicated management port (RJ-45)
5.
Two USB ports
6.
One GbE LAN port (RJ-45)
7.
One GbE LAN port with shared management (RJ-45)
8.
Power Button
9.
Health LED
10.
UID Button
11.
Serial Port
12.
Video Port
Page 1

Advertisement

Table of Contents
loading

Related Manuals for HP ProLiant DL2000

Summary of Contents for HP ProLiant DL2000

  • Page 1 The DL2000 is optimized for efficiency, density and flexibility and a server node can be serviced individually without impacting the operation of other server nodes sharing the same chassis. The DL2000 consists of up to 4 independent DL170e G6 servers in the 2U HP ProLiant e2000 G6 Chassis.

  • Page 2: Standard Features

    QuickSpecs HP ProLiant DL2000 Multi Node Server Standard Features NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section. Processor Six-Core Processors One of the following Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor depending on Model Intel®...
  • Page 3 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at http://www.hp.com/go/ddr3memory-configurator Network Controller HP NC362i Integrated Dual Port Gigabit Server Adapter Expansion Slots Half Height Nodes (1U): One available PCI Express Gen 2.0 slots: Slot 1: Low profile PCI-Express 2.0 x16 Full Height Nodes (2U): three available riser options Option 1: Up to three available PCI-Express Gen 2.0 slots:...
  • Page 4 NOTE: SAS Upgrade: A HP Smart Array Controller is required for SAS HDD support. Transfer rate: 6.0 Gb/s SAS supported. NOTE: If a Smart Array P410 Controller is added after initial purchase (e.g. an upgrade) a HP DL170e G6 P410 CONTROLLER CABLE OPTION KIT (P/N 612206-B21) must be ordered to connect the Smart Array Controller to the adapter board.
  • Page 5 HP representative for details. NOTE: To support HP hard drives exceeding 2.2 TB, a HP Smart Array Controller is required. Interfaces Serial Network RJ-45 (Ethernet) 2 10/100/1000 NIC ports (1 NIC shared for the HP ProLiant Lights Out 100i Remote Management) Graphics Management...
  • Page 6 NOTE: An HP DL170e GPU Adapter Kit (P/N 612253-B21) is required when installing this NVIDIA card. The NVIDIA cards can only be installed in the 2U node with the 2 slot full-height riser option: HP DL170e I/O Riser PCIe x16 x8 FIO option (P/N 512481-B21).
  • Page 7 Power Supply HP has a new design for ProLiant power supplies - the new Common Slot power supply bay. This design provides the customer with commonality in power supplies across multiple platforms to save on the cost of spares and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers come with high-efficiency Common Slot power supplies.
  • Page 8 Standard Features Form Factor HP ProLiant e2000 G6 Chassis - 2U Chassis can support up to four DL170e server nodes in the 2U chassis. HP ProLiant DL170e G6 Server - Half-width system board. Half-height (1U) or full-height (2U) depending on riser option selected.
  • Page 9 Secure Shell (SSH) Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.

  • Page 10: Optional Features

    For more information, see http://www.hp.com/go/insightcontrol. HP Insight Control includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, see: http://www.hp.com/services/insight.
  • Page 11 For additional information, please see: http://www.hp.com/go/insight Easy Set-up Easy Set-up is available for this platform as an ISO image web download. HP ProLiant Easy Set-up provides easy, step-by-step, single and multi-server server utilities to streamline server setup. The user experience is consistent...
  • Page 12 HP HPC Interconnects High Performance Computing (HPC) interconnect technologies are available for this server as part of the HP Cluster Platform portfolio. These high-speed InfiniBand and Gigabit interconnects are fully supported by HP when integrated within an HP cluster. Flexible, validated solutions can be defined with the help of configuration tools.
  • Page 13 HP StoreVirtual VSA With HP StoreVirtual VSA you can use the power of virtualization to turn a set of heterogeneous and disconnected physical disk drives in your servers and storage devices into a single pool of logical storage capacity.
  • Page 14 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require "custom" rack configuration or configuration for products not available in SCE, please contact HP's Customer Business Center or an Authorized Partner for assistance.

  • Page 15: Service And Support

    HP Installation and Startup for Insight Control Software Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers. http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf...
  • Page 16 HP Installation and Startup for Insight Control Software Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf...
  • Page 17 24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional cost to all warranty, HP Care Pack Service, and service agreement customers. For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales representative or HP Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant DA - 13847 North America —...

  • Page 18: Configuration Information - Factory Integrated Models

    NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.
  • Page 19 NOTE: Quantity 1 per chassis. HP Power Supplies NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor...
  • Page 20 Processor -> R-Dimm: Min 1 // Max 8 U-Dimm: Min 1 // Max 6 Processors -> R-Dimm: Min 2 // Max 16 U-Dimm: Min 2 // Max 12 HP I/O Expansion Options Full-height (Only required if PN: 609096-B21 is selected in Step 1A above) HP DL170h Input/Output PCIex16x4x4 FIO Riser Kit...
  • Page 21 NOTE: Supports SAS and SATA drives when using any Smart Array Controller other than the Smart Array P410 Controller. Optional Upgrades HP Smart Array Hot Plug Advance Pack for B110i w/1y 24x7 Supp Physical 1 Svr LTU TC421A Step 4: Choose Additional Options for Factory Integration NOTE: For additional options, please refer to the "Core Options"...

  • Page 22: Core Options

    HP ProLiant DL2000 Multi Node Server Core Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
  • Page 23 NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware version 5.0 or later is required for the following controllers:...
  • Page 24 Other controllers are not supported. SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 619291-B21 HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 581286-B21 HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive...
  • Page 25 HP Power Supplies NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor...

  • Page 26: Additional Options

    HP ProLiant DL2000 Multi Node Server Additional Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
  • Page 27 Misplacing or losing the key could result in data loss. HP Storage Controllers HP Smart Array P212 Controller HP Smart Array P212/256 1-ports Int/1-ports Ext PCIe x8 SAS Controller 462834-B21 HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS Controller...
  • Page 28 QuickSpecs HP ProLiant DL2000 Multi Node Server Additional Options HP Smart Array P812/1G FBWC 2-ports Int/4-ports Ext PCIe x8 SAS Controller 487204-B21 Optional Upgrades HP DL170e G6 Smart Array P410 Controller Cable Kit 612206-B21 NOTE: This cable kit is only required when upgrading with a Smart Array P410 Controller after initial purchase.
  • Page 29 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/14604_na/14604_na.html (Worldwide) HP Disk Storage Systems Disk Enclosures HP D2600 w/12 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 48TB Bundle E7W32A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13404_na/13404_na.html...
  • Page 30 NOTE: For additional information on sizing your server, please reference: http://www.upssizer.com. NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units.
  • Page 31 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/14557_na/14557_na.html NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP PDUs and additional information please visit: www.hp.com/go/rackandpower. HP Remote Monitoring HP Remote Monitored Power Distribution Unit: 1U Version Power Distribution Units HP 2.8kVA 120 Volt 12 Outlet NA/JP Monitored Power Distribution Unit...
  • Page 32 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13650_na/13650_na.html NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP PDUs and additional information please visit: www.hp.com/go/rackandpower. HP Rack Series HP Intelligent Series Rack...
  • Page 33 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11834_na/11834_na.html HP Server Console Switch G2 with Virtual Media & CAC HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software AF618A HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software AF619A...
  • Page 34 QuickSpecs HP ProLiant DL2000 Multi Node Server Memory HP ProLiant DL170e G6 Server NOTE: Memory configurations show Maximum Memory population. Maximum Memory Up to 192GB, using PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at 2 DIMMs per Channel...
  • Page 35 QuickSpecs HP ProLiant DL2000 Multi Node Server Memory Unbuffered with ECC Registered DIMMs (RDIMMs) DIMMs (UDIMMs) DIMM Type -> Single Single Rank Rank (1R) Dual Rank (2R) Quad Rank (4R) (1R) Dual Rank (2R) DIMM Rank -> DIMM Capacity ->...
  • Page 36 QuickSpecs HP ProLiant DL2000 Multi Node Server Memory CPU1 CPU2 slot # population order slot # population order Chnl 1 Chnl 1 Chnl 2 Chnl 2 Chnl 3 Chnl 3 RDIMM maximum configuration (2 CPUs) 192GB, consisting of sixteen (16) 16GB quad rank PC3-8500 RDIMMs...
  • Page 37 DDR3 memory options part number decoder Following are memory options available from HP: HP Memory Registered DIMMs (RDIMMs) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500656-B21 HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500658-B21...
  • Page 38 QuickSpecs HP ProLiant DL2000 Multi Node Server Memory Tool: www.hp.com/go/ddr3memory-configurator. NOTE: Kits described as LV include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient NOTE: PC3L is a low voltage memory. NOTE: There is a maximum support limitation of 8 ranks per memory channel...

  • Page 39: Drive Support

    QuickSpecs HP ProLiant DL2000 Multi Node Server Storage Eight 3.5" Hot-plug SAS/SATA hard drive bays (two node configuration) Eight 3.5" Hot-plug SAS/SATA hard drive bays (four node configuration) 1-24 Twenty-four 2.5" Hot-plug SAS/SATA hard drive bays 1-16 Sixteen 2.5" Hot-plug SAS/SATA hard drive bays...
  • Page 40 HP Smart Array P411 Controller HP Smart Array P812 Controller To use hard drives exceeding 2.2 TB, you must create a boot volume using offline ACU version 8.75 or later. HP Smart Array controllers do not support boot volumes exceeding 2.2 TB.
  • Page 41 Supported Supported Controller 1TB 3G SATA 7.2K 1-24 Embedded HP Smart Array Hot Plug Advanced Pack for B110i (RAID 500GB 3G SATA 7.2K 0, 1, 10) HP Smart Array P212/Zero Memory Controller HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives...

  • Page 42: Power Specifications

    4600 4600 4600 To review typical system power ratings use the Active Answers HP Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energy-efficient www.hp.com/go/hppoweradvisor DA - 13847 North America — Version 31 — December 13, 2013...

  • Page 43: System Specifications

    PDU power cord (416151-B21). NOTE: If customers require a power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix. DA - 13847 North America — Version 31 — December 13, 2013...

  • Page 44: Technical Specifications

    47 to 63 Hz Rated Input Power 855W (at 100 VAC), 840.72W (at 200 VAC) Power Specifications NOTE: To review typical system power ratings use the HP Power Advisor which is available online located at url: www.hp.com/go/proliant-energy- efficient www.hp.com/go/hppoweradvisor Power Supply Output Rated Steady-State Power 653.10W (at 100 VAC),...
  • Page 45 Supports multiple logical volumes Setup through ROM based Array Configuration Utility Installation scripting support NOTE: Hot-Plug functions require the purchase of the HP Smart Array Hot Plug Advance Pack for B110i. RAID OS Support Microsoft Windows Server 2003 x32 and x64 Editions Microsoft Windows Server 2008 x32 and x64 Editions.
  • Page 46 Intel Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Table of Contents