Table of Contents
Advertisement
EXTrA fEATUrES
In the Extra Features Menu, there are three programmable submenus: Room
Monitoring, Intercom and Push to Talk.
1. Make sure your base or handset is off (not in talk mode).
. Press the Menu (SKL) button to enter the menu.
3. Use the
or
4. Press the Select (SKL) button to enter the submenu.
room Monitoring
from the Extra Features menu:
1. Use the
or
. Press the Select (SKL) button and the list of registered handsets and base shows
on display.
3. Use the
or
(SKL) button to confirm.
NoTE:
1) if handsets have been named, then the name will be displayed on
the LCD instead of handset numbers.
2) During the room monitoring, it will emit a beep tone if there
are incoming calls. You may press the TALK or SPKr button on the
handset or SPEAKEr on the base to answer the call and quit the
room monitor mode.
4. Press the Back (SKR) button to end room monitoring.
intercom operation
The intercom feature allows you to have a conversation with another registered
handset or the base without tying up the telephone line, allowing you to still receive
incoming calls.
Handset to Handset intercom Call
from the Extra Features menu:
1. Use the
or
. Press the Select (SKL) button and the list of registered handsets and base shows
on display.
3. Use the
or
(SKL) button to confirm.
5
button to scroll to Extra Features.
button to scroll to Room Monitoring.
button to scroll to the desired handset or base. Press the Select
button to scroll to Intercom.
button to scroll to the desired handset or base. Press the Select
Advertisement
Table of Contents
