Display Setting; Hdmi Deep Color; Video Process - Toshiba BDX1100KC Owner's Manual

Display Setting

1. Press SETUP
[General Setting] menu is displayed.
2. Press  to select [Display Setting],
then press  .
3. Select an option, press  to access.
... Display Setting...
TV

Video Process

Motion Vide...
Move cursor key to select menu option
then use "OK" key to select
4. Press / to select a setup option and
press 
5. Select the setting you wish to change
and press OK to confirm.
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
[TV]
• [TV Screen]
Select the screen format according to
how you want the picture to appear on
the TV.
{16:9 Full} – for a disc with the aspect
ratio of 4:3, the output video is stretched
into 16:9 full screen.
{16:9 Normal} – for a disc with the
aspect ratio of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{4:3 Pan&Scan} – for standard TV,
Display a wide picture on the entire
screen and cuts off the redundant
portions.
{4:3 Letterbox} – for standard TV,
Display a wide picture with two black
borders on the top and bottom of 4:3
screen.
• [Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{Auto} – Select the most suitable
resolution according to the TV .
{480I/576I}, {480P/576P}, {720P},
{1080I}, {1080P}
– Select a video resolution setting that is
best supported by the TV. See TV manual
for details.
1
TV Screen 16:9 Normal
Resolution 480I/576I
Color Space YCbCr422

HDMI Deep Color

Off
HDMI 1080P 24F On
SETUP Exit
Note:
-When resolution is set to 720p/1080i/1080p:
(1) If only CVBS connected, the resolution of CVBS
video output will be set to 480i/576i automatically.
(2) If HDMI and CVBS are both connected, there will
be no CVBS video output, instead, a message will be
shown as follows:
Out Of Range:Check Display Resolution
• [Color Space]
Select a predefined Color space of
picture.
{RGB} – select RGB Color space.
{YCbCr} – select YCbCr Color space.
{YCbCr422} – Select YCbCr422 Color
space.
{Full RGB} – select Full RGB Color
space.
• [HDMI Deep Color]
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports deep Color
feature.
{30 bits} – Output 30 bits Color.
{36 bits} – Output 36 bits Color.
{Off} – Output standard 24 bit Color.
Note:
-When the color space is "YCbCr422", even if HDMI
Deep Color is set to 30bits/36bits, it is not output with
Deep Color.
• [HDMI 1080p 24F]
{On} – Enable 1080p 24F video resolution
setting.
{Off} – Disable 1080p 24F video
resolution setting.
About HDMI 1080p 24F Notes:
If you want the 24Hz output, it should fulfill below 3
conditions:
1.TV supports the 24Hz display:
2.Player choose the 24Hz option in the setup menu;
3.Media must be the 24Hz video.
Notes:
- This resolution becomes effective only when the
playing BD-Disc contents are Film source.
- During HDMI 1080p 24F playback, there will be no
composite output.
[Video Process]
... Display Setting...
Video Adjust
TV
Video Process Sharpness
Motion Video...
Move cursor key to select menu option
then use "OK" key to select
More...
Low
SETUP Exit