GE Profile PT925 Technical Service Manual page 56

Ge pro?le wall oven
Hide thumbs Also See for Profile PT925:
Table of Contents

Advertisement

Problem
Possible Causes
Power outage,
Power outage or surge
clock flashes
When using the ovens,
it is normal to see
steam coming out of
the oven vents. As the
Steam from the
number of racks or
vent
amount of food being
cooked increases,
the amount of visible
steam will increase
Burning or oily
This is normal in a new
odor emitting from
oven and will disappear
the vent
in time
An odor from the
insulation around the
Strong odor
inside of the oven is
normal for the first few
times the oven is used
A convection fan may
Fan noise
automatically turn on
and off
Oven racks are
The racks were cleaned
difficult to slide
in a self-clean cycle
What To Do
Reset the clock. If the oven was in use, you must reset it
by touching the CLEAR/OFF pad, setting the clock, and
resetting any cooking function.
This is normal.
To speed the process, set a self-clean cycle for a minimum
of 3 hours. See the Using the Self-Cleaning Oven section.
This is temporary.
This is normal. To maximize cooking evenness, the fan
is designed to operate in both directions, with a pause
in between.
The convection fan will operate during preheat of
the bake cycle. The fan will turn off after the oven is
heated to the set temperature. This is normal.
Apply a small amount of vegetable oil to a paper towel
and wipe the edges of the oven racks with the paper
towel. Do not spray with Pam® or other lubricant sprays.
– 56 –

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents