Speakers - HP Pavilion 14 Maintenance And Service Manual

Reverse this procedure to install the USB board.

Speakers

Description
Speakers (include speaker cables)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b. Hard drive (see
c. WLAN module (see
d. Keyboard (see
e. Top cover (see
f. System board (see
Remove the speakers:
1. Release the speaker cable from the clips (1) and routing channel built into the base enclosure.
2. Remove the Phillips PM2.5×3.5 screw (2) and the Phillips PM2.5×6.5 screw (3) that secure
the speakers to the base enclosure.
74 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 37), and then remove the following components:
Optical drive on page
Hard drive on page 40)
WLAN module on page
Keyboard on page 46)
Top cover on page 49)
System board on page
38)
42)
57)
Spare part number
722912-001