Before using this motorcycle, check the following points:
Item
Fuel
Engine oil
Front brake
Rear brake
Throttle grip/Housing
Drive chain
Wheels/Tires
Control/Meter cable
Brake and shift pedal shafts
Brake lever pivots
Center and sidestand pivots
Fittings/fasteners
Lights and signals
Switches
Battery
PRE-OPERATION CHECKS
9 Check fuel level/top up as required.
9 Check oil level/add oil as required.
9 Check operation, condition and free play. Adjust if necessary.
9 Check fluid level and fluid leakage. Fill with DOT3 or DOT4
brake fluid if necessary. (T105SE)
9 Check operation and pedal free play. Adjust if necessary.
9 Check for smooth operation. Lubricate/Adjust if necessary.
9 Check chain slack and condition. Adjust if necessary.
9 Check tire pressure, wear, damage and spoke tightness.
9 Check for smooth operation. Lubricate if necessary.
9 Check for smooth operation. Lubricate if necessary.
9 Check for smooth operation. Lubricate if necessary.
9 Check for smooth operation. Lubricate if necessary.
9 Check all chassis fittings and fasteners.
9 Tighten/Adjust, if necessary.
9 Check for proper operation.
9 Check for proper operation.
9 Check fluid level, top-up with distilled water if necessary.
Routine
22
Page
24
25, 41~43
50~53
54
—
56~59
26~27
—
60
60
60
—
—
—
62~64