Registering The Ethernet Gateway - HP Ethernet Gateway hn200e Quick Start Manual

registering the Ethernet
gateway
Make sure you register your product with HP
after the installation process is complete. The
registration option has been pre-selected for you.
HP registration provides you with automatic
notification of updates to the firmware installed
on the Gateway and to the software installed on
the PC.
If you choose to register your product at a later
date, enter the following into the address
window of your Web browser (such as Internet
Explorer or Netscape):
http://register.hp.com
Then press Enter.
6
Filename: QS Ether GW.doc Title: HP-Print2k.dot
Template: HP Quick Start.dot Author: Rob Heiret
Revision #: 49 Page: 6 of 11 Printed: 08/14/01 03:29 PM
installing additional network
computers
1 Turn on the computer to be connected and
insert the CD-ROM in the CD-ROM drive.
2 When the welcome screen appears, click
installation.
3 Follow the onscreen instructions. Select Add
additional computer when you are
prompted to install either a first PC or an
additional PC.
4 When the installation is completed, click
Finish.
5 Repeat Steps 1 to 4 for each additional
computer on your home network.
Note:
Keep the CD-ROM in a safe place for
future use.
Last Saved By: Elizabeth Stoneburg