Split-Playing Two Different Voices With Your Left And Right Hands - Yamaha MOXF6 Owner's Manual

Quick Guide
4
Select the desired Voice from the list, then press
the [ENTER] button.
The Performance Play display will appear.
The Voice selected in the Voice mode will be assigned to
Part 1, and the Voice selected after pressing the [LAYER]
button will be assigned to Part 2. These two Voices are
sounded simultaneously in a layer as a "Performance."
You can confirm what Voices are layered on the display called
up via the [F2] VOICE button.
5
Press the [STORE] button to store the settings as
a Performance.
NOTE
When you press the [EDIT] button in the Store display, you
can check the sound of the Performance at the storing
destination.
Split—Playing two different Voices
with your left and right hands
This section shows you how to create a Performance in which
the keyboard is divided (or split) into two sections—the left-
hand section and the right-hand. The lowest note of the right-
hand section is referred to as the "Split Point." By creating
such a Performance, you can play a bass part with your left
hand, and a piano part with your right hand, for example.
1
Select a Voice in the Voice mode.
32
MOXF6/MOXF8 Owner's Manual
2
Press the [SPLIT] button on the panel.
The Category Search display appears.
3
Move the cursor to "SPLITPOINT" then set the Split
Point.
You can determine the Split Point by holding the [SHIFT]
button then pressing the desired note on the keyboard.
NOTE
The note set to the Split Point is included in the upper section
of the keyboard.
4
Move the cursor to "LO/UP" then select whether
the desired Voice is assigned to the lower section
or the upper section of the keyboard.
NOTE
When the original Voice is a Drum Voice, Split is not applied
to the part assigned the Drum Voice. In this case, only the
desired Voice is assigned to the keyboard range according
to the "SPLITPOINT" and "LO/UP" settings.
5
Move the cursor to "Main"/"Sub" then select the
Category that includes your desired Voice.
6
Press the Cursor [>] button.
The Voice list is shown.