HP Cisco Catalyst Blade Switch 3020 Release Note

Release Notes for the Cisco Catalyst
Blade Switch 3020 for HP,
Cisco IOS Release 15.0(2)SE and Later
November 06, 2013
These release notes include important information about Cisco IOS Release 15.0(2)SE and any
limitations, restrictions, and caveats that apply to them. Verify that these release notes are correct for
your switch:
•
•
•
For the complete list of Cisco Catalyst Blade Switch 3020 for HP documentation, see the
Documentation" section on page
You can download the switch software from this site (registered Cisco.com users with a login password):
http://www.cisco.com/cisco/software/navigator.html?a=a&i=rpm
Contents
•
•
•
•
•
•
•
•
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2011–2012 Cisco Systems, Inc. All rights reserved.
If you are installing a new switch, see the Cisco IOS release label on the switch packaging.
If your switch is on, use the show version privileged EXEC command. See the
Software Version and Feature Set" section on page
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the "Deciding Which Files to Use" section on page
"System Requirements" section on page 2
"Upgrading the Switch Software" section on page 3
"Installation Notes" section on page 5
"New Software Features" section on page 6
"Limitations and Restrictions" section on page 6
"Important Notes" section on page 11
"Open Caveats" section on page 13
"Resolved Caveats" section on page 14
3.
19.
"Finding the
3.
"Related