Step 6.
Remove the 2 screws that secure the converter bracket to the front bezel.
to remove it.
Step 7.
Remove the tape that secures the LVDS cable to the connector.
Step 8.
Press the pins to unlock the LVDS cable from the connector on the LED panel
out as shown.
Step 9.
Press the pin to unlock the converter cable from the connector on the LED panel
the converter cable out as shown.
Step 10. Remove the 2 screws that secure the LED panel to the front bezel.
44
Lenovo C240/245/255 All-In-One PC Hardware Maintenance Manual
2
2
4
1
Lift up the bracket
1
, then pull it
3
, then pull