Host Modification Success; Host Modification Errors; Host Modification Error Codes - HP 3PAR StoreServ 7200 2-node Manual

Table 45 Host hostPersona Enumeration (continued)
Symbol
ONTAP_LEGACY
VMWARE
OPENVMS

Host Modification Success

Upon successful modification of a host, the HTTP code 200 OK is returned, and there is no message
body. The URI of the updated host will be returned in the location portion of the response header:
/api/v1/hosts/<host name>

Host Modification Errors

Possible error codes following a host modification request are shown in
generic API error codes, see
Table 46 Host Modification Error Codes
API Error
INV_INPUT
INV_INPUT_PARAM_CONFLICT
56 Working with Hosts
Value
7
8
9
Table 5 (page 17).
HTTP Code
400 Bad Request
400 Bad Request
Description
Persona with capability of SoftInq.
Persona with capability of SubLun,
ALUA.
Persona with capability of UARepLun,
Lun0SCC.
Table 46 (page
Description
Missing host name.
If pathOperation is specified, then
the following descriptors cannot be
specified:
newName
persona
chapOperation
If chapOperation is specified, then
the following descriptors cannot be
specified:
newName
persona
pathOperation
forcePathRemoval is specified and
pathOperation is Add.
forcePathRemoval can be used only
with path removal.
Both iSCSINames and FCWWNs are
specified.
The system can handle either FC WWN
or iSCSI names in one operation, but
not both. (Multiple FC WWN or iSCSI
names can be specified.)
chapOperation is Add, and
chapRemoveTargetOnly is specified.
chapRemoveTargetOnly is for chap
removal only.
chapOperation is remove, and
chapSecret, chapOperationMode,
chapName, or chapSecretHex is
specified.
56). For