Mount The Microwave Oven - GE JVM2052 Installation Instructions Manual

B5

MOUNT THE MICROWAVE OVEN

CAUTION:
To avoid the risk of personal
injury (back injury or other injuries due to excessive
weight of the microwave oven) or property damage,
you will need two people to install this microwave
oven.
IMPORTANT: Do not grip or use handle during
installation.
WARNING:
Can cause injury or death: If installing unit with
metal countertops, cover the edge of the power
supply cord hole with the power supply cord
bushing.
IMPORTANT: If filler blocks are not used, case damage
may occur from overtightening screws.
NOTE: When mounting the
microwave oven, thread
power cord through hole
in bottom of top cabinet.
Keep it tight throughout
Steps 1–3. Do not pinch
cord or lift oven by pulling
cord.
2 Rotate front of oven up
against cabinet bottom.
3 Insert a self-aligning screw through top-center
cabinet hole. Temporarily secure the oven by
turning the screw at least two full turns after
the threads have engaged. (It will be completely
tightened later.)
Installation Instructions
Risk of Electric Shock.
1 Lift microwave oven,
tilt it forward, and hook
slots at back bottom
edge onto four lower
tabs of mounting plate.
4 Use the power supply cord clamp to bundle the
power supply cord. Install the power supply cord
clamp, using a screw as shown, to the inside of
the cabinet.
Cabinet Front
5 Attach the microwave oven to the top cabinet.
6 Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns
on each screw.
7 Tighten the two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall
and the top cabinet.)
Install grease filter. See the Owner's Manual
8
packed with the microwave oven.
18
Damper
Cabinet Bottom Shelf
Filler Block
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
Microwave Oven Top