System Connections - Sharp AN-PR1000H Operation Manual

System connections

AN-PR1000H
ENGLISH
Installing the main unit and the subwoofer
1. Pull up both speakers outwards.
2. Pre-fasten the screw to the speaker box.
3. Follow below steps to fix the metal frame.
Insert the metal frame in a slant position and secure it onto the screws.
Pull up the other side of the metal frame to position
E-9
4. Turn the unit. Stick the metal frame cushion onto the metal frame and place the
glass shelf on top of it.
Top glass cover cushion
Protection
sheet
Metal frame cushion
Notes:
It is advisable for the top glass cover to be carried by 2 persons.
Top glass with sticker on its surface, must face upwards.
Metal frame must not be removed to ensure safety.
The maximum load for the top glass cover on the unit is 100 kg.
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket
and position the FM aerial wire in the direction where
and tighten all screws.
the strongest signal can be received.
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup.
Place the aerial away from the unit for better reception.
External FM aerial
Use an external FM aerial if you require better reception. Consult your dealer.
Note:
When an external FM aerial is used, disconnect the supplied FM aerial wire.
Top glass cover
Glass shelf
Sticker up side
External
FM aerial
75 ohms
coaxial cable
Sticker up side
FM
aerial