Light Bulb Replacement - GE SpacemakerXL JVM1320 Owner's Manual

Light Bulb Replacement

Cooktop Light/
Night Light
Oven Light
To replace the bulb(s), first discon-
nect the power at the main fuse or
circuit breaker panel or pull the
plug.
Remove the screw at the front of
the light cover and lower the cover.
REMOVE SCREWS
Be sure the bulb(s) to be replaced
are cool before removing. After
breaking the adhesive seal, remove
the bulb by gently turning.
To replace the oven light, first dis-
connect the power at the main fuse
or circuit breaker panel or pull the
plug.
Remove the top grille by taking out
the 2 screws that hold it in place.
Replace with 40-watt tubular bulbs.
Order WB36X936 from your GE
supplier. Tubular 40-watt bulbs
(40T6 / /2), available in supermar-
1
2
kets and hardware stores, may also
be used for replacements.
Replace the screw. Connect electri-
cal power to the oven.
Next, remove the two screws locat-
ed above the door near the center
of the oven that secure the light
housing.
Replace the burned-out bulb
with a 30-watt incandescent bulb
(WB02X4235), available from your
GE supplier.
39