Control Panel - GE 164D2966P087 Use And Care Manual

Probe
The temperature probe may be cleaned with soap and
water or a soap-filled scouring pad. Cool the
temperature probe before cleaning. Scour stubborn
spots with a soap-filled scouring pad, rinse and dry.
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.
Oven Light Bulb
NOTE: The glass cover should be removed
only when cold. Wearing latex gloves may offer
a better grip.
The light bulb is located on the top of the oven.
Before replacing the bulb, disconnect electrical
power to the oven at the main fuse or circuit breaker
panel. Let the bulb cool completely before removing
it. For your safety, do not touch a hot bulb with a
damp cloth. If you do, the bulb will break.
Oven Heating Elements
Do not clean the bake element or the broil element.
Any soil will burn off when the elements are heated.
The bake element can be lifted gently to clean the
oven floor. If spillovers, residue or ash accumulate
the bake element gently wipe around the
around
element with warm water.

Control Panel

It's a good idea to wipe the control panel after each
use. Clean with mild soap and water or vinegar and
water, rinse with clean water and polish dry with a
cloth.
soft
36
(continued)
To remove: Turn to remove the
cover, then remove the bulb.
To replace: Put in a new
40-watt appliance bulb.
NOTE:
A 40-watt appliance bulb is
smaller than a standard 40-
watt household bulb.
Install and tighten the cover.
Reconnect electrical power to
the oven.
Do not use abrasive cleansers, strong liquid
cleaners, plastic scouring pads or oven cleansers
on the control panel—they will damage the finish.
A 50/50 solution of vinegar and hot water works well.
Socket
Bulb
-L ,J ength
Glass
Broil Element
Bake Element