GE 164D2966P126 Use And Care Manual page 37

It's a good idea to wipe the control panel after each
use. Clean with mild soap and water or vinegar arrd
water, rinse with clean water and polish dry with a
soft cloth.
Glass Window
To clean the outside of the oven window, use
cleaner. Rinse and polish with a dry cloth.
Do not allow the water or cleaner to run down
inside the openings in the glass or the openings in
the top of the oven door while cleaning.
USE THIS PROBLEM SOLVER
PROBLEM
OVEN WILL
NOT WORK
OVEN LIGHT DOFS
NOT WORK
FOOD DOES NOT
BROIL PROPERLY
a glass
QUESTIONS?
POSSIBLE CAUSE
This is the function error code. Press the CLEAWOFF pad. Allow oven to
cool 1 hour. Place oven back into operation. If function error occurs again,
disconnect power to the oven and call for service.
The circuit breaker in your house has been tripped, or a fuse has been blown.
Oven controls not properly set.
Light bulb is loose or defective. Tighten or replace.
Pad operating oven light is broken. Call for service.
The oven controls are not properly set. See the Broiling section.
The door not left ajar as recommended.
Improper shelf position being used.
Food is being cooked on a hot pan.
Cookware is not suited for broiling.
Low voltage. See the Broi 1 ing section.
Aluminum foil used on the broiler pan
Incorrect cookware of improper size is being used.
The oven thermostat needs adjustment. See the Adjust the Oven Thermostat-
Do [1 section.
Do not use abrasive cleansers, strong liquid
cleaners, plastic scouring pads or oven cleansers
on the control panel—they will damage the finish.
A 50/50 solution of vinegar and hot water works well.
Metal Parts
Do not use steel wool, abrasives, ammonia or
commercial oven cleaners. To safely clean surfaces:
wash, rinse an(i then dry with a soft cloth.
has not been fitted properly
37