Table of Contents
Advertisement
Cable Installation
If you want to install DVB-C channels, select the "CABLE" option and press the "OK" button on the remote control to
continue. To continue, please select "YES" and press "OK". To cancel the operation, select "NO" and press "OK".
You can select frequency ranges from this screen. For highlighting lines, use the "▼" or "▲" buttons. You can enter
the frequency range manually by using the numeric buttons on the remote control. Set the Start and Stop Frequency
as desired by using the numeric buttons on the remote control. After this operation, you can set the Search Step as
8000 KHz or 1000 KHz.
If you select 1000 KHz the search will take longer, since the TV needs to check more frequencies. Depending on your
Country selection in the first time installation, A 250 KHz search step option might be available on the Network
Channel Scan screen. Note that if you perform the search with 250 KHz option, the search process could take longer.
Press "OK" to start the installation process. During this progress the bar will filland found channels will be added to
the list.
When the automatic channel installation is complete, the following summary appears.
Here you can move, edit or lock channels. The information bar displayed on the bottom part of the screen will guide
you through the option that you are using.
Now you can press "MENU" to exit the installation page or you can press the "OK" button to watch TV.
8
Advertisement
Table of Contents
