Installation Instructions - GE JBW3 Use And Care & Installation Manual

INSTALLATION INSTRUCTIONS

STEP 4
3 WIRE POWER CORD INSTALLATION
Remove the 3 wire terminal screws from
the connector block. Insert screws through
each power cord terminal ring and into the
connector block until the screws engage the
nuts. Be certain that the center wire is connected
to the center screw of the connector block.
Tighten screws securely. Do NOT remove
ground strap connection.
NEUT
TERM
POWER
WIRE OF THE POWER CORD MUST BE
TERMINAL LOCA'T'ED IN THE CENTER OF
THE CONNECTOR BLOCIL THE POWER
LEADS MUST BE CONNECTED TO THE
OUTSIDE (BRASS COLORED) TERMINALS.
32
4 WIRE POWER CORD INSTALLATION
A.
block.
B. Remove the grounding screw and strap from
the connector block middle location and the
screw connection to the frame of the range.
CONNECTOR
K
D
GROUNDING TO RANGE)
C. Insert screws through each power cord
terminal ring and into connector block until
screw engages nut. Be certain that the center
wire is connected to the center screw of the
connector block. Tighten screws securely.
D. Attach ground wire to the frame of the range.
SUPPLY CIRCUIT IS CONNECTED TO
THE NEUTRAL TERMINAL LOCATED
IN THE CENTER
BLOCK. THE POWER LEADS MUST
BE CONNECTED TO THE OUTSIDE
(BRASS COLORED) TERMINALS. THE
4TH GROUNDING LEAD MUST BE
CONNECTED TO THE FRAME OF THE
RANGE WITH THE GROUNDING SCREW.
Remove the 3 screws from the connector
BEFORE
AFTER
OF THE CONNECTOR
NEUTRAL
TERMINAL