Rear Spacers - AEG S32500KSS0 User Manual

Climate class
SN
N
ST
T

Rear spacers

In the bag with the documentation, there are two spacers which must be fitted as shown in
the figure.
1. Fit the spacers into the holes. Make sure
that the arrow (A) is positioned as shown
in the picture.
2. Turn counter-clockwise the spacers
through 45° until they lock into place.
Levelling
When placing the appliance ensure that it stands
level. This can be achieved by two adjustable feet
at the bottom in front (2). If necessary adjust the
feet by removing the spacer (1).
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
Ambient temperature
45˚
13
Installation
A
1
2