Auto Installation; Programme Setup; Analogue/Digital Setting - Sharp AQUOS CD-BA250 Operation Manual

Auto installation

You can run auto installation again, even after setting up
the preset channels.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "
Press a /b to select "Auto installation", and then
3
press ENTER.
4
If you have already set the password, enter it here.
• See page 12 for setting a password.
5
Press c/d to select "Yes", and then press
ENTER.
6
Press a/b to select your country channels listed
on the screen, and then press ENTER.
Press a/b to select "D-TV", "A-TV" or
"D-TV + A-TV", and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.

Programme setup

Programme setup
Digital setting
You can reconfigure DTV services settings automatically
or manually.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "
3
Press a/b to select "Digital setting", and
then press ENTER. If you have already set the
password, enter it here.
• See page 12 for setting a password.
4 Press a/b to select the desired menu item, and
then press ENTER.
■ Auto search
Use this menu to add new services automatically after
auto installation has been completed.
■ Manual search
Add new services within a specified frequency band.
• Press c/d to select the frequency and then press ENTER.
" (Programme setup).
Auto installation
Digital setting
Analogue setting
Programme edit
" (Programme setup).
Analogue setting
You can reconfigure the TV channel settings
automatically or manually using Auto search, Manual
adjust or Programme edit.
H Auto search
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "
Press a /b to select "Analogue setting", and
3
then press ENTER. If you have already set the
password, enter it here.
• See page 12 for setting a password.
Press a /b to select "Auto search", and then
4
press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
H Manual adjust
You can set some channel items manually.
1
Repeat steps 1 to 3 in Auto search.
Press a /b to select "Manual adjust", and then
2
press ENTER.
Press a /b to select your desired item, and then
3
press c / d to adjust the settings.
Item
Storage to Save programme to your desired channel
[1~99] number. Press R to save.
Sound system Select the optimum sound system
(Broadcasting system) to receive.
(B/G, D/K, I, M)
Colour system Select the optimum colour system to
receive. (PAL, SECAM, NTSC)
Current CH Select the channel you want to edit.
• Selected channel will be automatically
refl ected in the background.
Search Start searching from current channel.
• Instead of pressing c / d to adjust the
frequency, you can set by directly entering the
frequency number of the channel with
0 — 9.
Press R to save.
Fine-tune Tune the frequency of the stored channel
to your desired position.
• Adjust while checking the background
picture as a reference.
Press R to save.
NOTE
• The frequency shown below the On-Screen Display shows
the real-time frequency of the displayed channel.
" (Programme setup).
Description
9