Advertisement
Operating
Instructions
5
1
2
1.
Before using the device make sure that all parts are clean, as described in the chapter "Cleaning and
disinfecting".
2.
Remove the top cover and nebulizer
3.
Pour the drug prescribed by the doctor into the drug ampoule
the upper line in the ampoule. The maximum content is approx 6ml. If the dose to be inhaled is
larger than the maximum capacity of the ampoule, it should be divided into several separate
treatments.
Note: This device is not intended to be used with Pentamidine.
4.
Align the tenon of the nebulizer kit with the groove on the main unit as illustrated. Push down and
turn the nebulizer kit to lock it on the main unit. Adjust the angle of the nebulizer kit to the desired
position of treatment.
5.
The device can be used in 2 different ways:
To use with mouthpiece
Install the mouthpiece on the nebulizer cap with the desired
angle for aerosol therapy.
To use with mask
Install the mask with mask adapter on the nebulizer cap.
Ensure their tightness and closure by applying sufficient
pressure when installing.
6. Connect the device to electrical power. This device can be
operated with various power sources:
4
1.
2. ON/OFF Button
3. Power Socket
4. Top Cover
5. Nebulizer Kit
3
kit
from the device.
6
Power Indication Light
Green light while power ON
and reassemble
kit. Do not fill over
Advertisement
