Sharp MD-X60H Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Stereo System
  5. MD-X60H
  6. Service manual
Sharp MD-X60H Service Manual

Sharp MD-X60H Service Manual

Hide thumbs Also See for MD-X60H:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol
Laboratories Licensing Corporation.
SAFETY PRECATION FOR SURVICE MANUAL .............................................................................................................. 2
INPORTANT SERVICE NOTES (FOR U.K. ONLY) ........................................................................................................... 3
WIRING OF PRIMARILY SUPPLY LEADS (FOR U.K. ONLY) .......................................................................................... 3
SPECIFICATIONS ............................................................................................................................................................. 4
NAMES OF PARTS ........................................................................................................................................................... 5
OPERATION MANUAL ....................................................................................................................................................... 8
DISASSEMBLY ................................................................................................................................................................ 10
REMOVING AND REINSTALLING THE MAIN PARTS ................................................................................................... 14
ADJUSTMENT ................................................................................................................................................................. 17
EXPLANATION OF ERROR DISPLAY ............................................................................................................................. 27
EEPROM WRITING PROCEDURE .................................................................................................................................. 29
RDS OPERATION ............................................................................................................................................................ 31
NOTES ON SCHEMATIC DIAGRAM .............................................................................................................................. 35
TYPE OF TRANSISTOR AND LED ................................................................................................................................. 35
WIRING DIAGRAM .......................................................................................................................................................... 36
BLOCK DIAGRAM ........................................................................................................................................................... 38
SCHEMATIC DIAGRAM / WIRING SIDE OF P.W.BOARD ............................................................................................. 42
WAVEFORMS OF CD CIRCUIT ...................................................................................................................................... 69
WAVEFORMS OF MD CIRCUIT ..................................................................................................................................... 70
TROUBLESHOOTING (CD SECTION) ........................................................................................................................... 72
TROUBLESHOOTING (MD SECTION) ........................................................................................................................... 76
FUNCTION TABLE OF IC ................................................................................................................................................ 81
REPLACEMENT PARTS LIST/EXPLODED VIEW/PACKING OF THE SET
SERVICE MANUAL
are trademarks of Dolby
CONTENTS

SHARP CORPORATION

- 1 -
MD-X60H
• In the interests of user-safety the set should be restored to its original
condition and only parts identical to those specified should be used.
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
MD-X60H
No.S6849MDX60H//
Page

Advertisement

Table of Contents
loading

Related Manuals for Sharp MD-X60H

Summary of Contents for Sharp MD-X60H

  • Page 1: Table Of Contents

    MD-X60H SERVICE MANUAL No.S6849MDX60H// MD-X60H • In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified should be used. Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.

  • Page 2: Safety Precation For Survice Manual

    MD-X60H SAFTY ORECAUTION FOR SERVICE MANUAL WARNINGS (CD) WARNINGS (MD) THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER The AEL (ACCESSIBLE EMMISSION LEVEL) of the laser POWER OUTPUT IS LESS THAN CLASS 1 BUT THE LASER power output is less than class 1 but the laser component is...

  • Page 3: Inportant Service Notes (For U.k. Only)

    MD-X60H Magnetic Head Precaution to be taken when replacing and servicing the laser pickup. The following precautions must be observed during servicing Optical pickup to protect your eyesvagainst exposure to the laser. Warning of possible eye damage when repairing: If the AC power plug is connected when the inner cover of the unit is removed, the laser will light up during focus access (about 1 second) (Fig.

  • Page 4: Specifications

    MD-X60H FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL. SPECIFICATIONS Motor: DC motor with electronic governor MiniDisc recorder section Signal/noise ratio: 50 dB (Recording/Playback, Dolby NR off) Type: MiniDisc recorder Dolby NR effect; 10 dB (at over 5 kHz)

  • Page 5: Names Of Parts

    MD-X60H NAMES OF PARTS Front panel On/Stand-by Button: ON/STAND-BY Tuner Call (Band Select) Button: TUNER (BAND) Preset Equalizer Button: PRE-EQ Extra Bass Button: X-BASS Auxiliary Input (Digital/Analogue) Select Button: AUX MD Compartment Sampling Frequency Indicators (CD) Open/Close Buttons: (CD) Play Buttons: 1...
  • Page 6 MD-X60H Display window (CD/MD) Music Schedule Indicators Level Meters (CD/MD) More Tracks Indicator: Character Information Display (TAPE) Direction Indicators: CD Indicator (TAPE) Loading Indicator (TAPE) Recording Indicator (TAPE) Reverse Mode Indicator (TAPE) Dolby NR Indicator: MD Indicator Pole Position Record Indicator...
  • Page 7 MD-X60H Remote control Remote Control Transmitter LED (MD/CD/TUNER) Direct Key (CD/MD) Programme Button: PROGRAM (CD/MD) Programme Clear Button: CLEAR (CD/MD) Play Mode Button: P-MODE RDS control section Programme Type/Traffic Information Search Button: PTY. TI EON Button ASPM Button 3 4 5...

  • Page 8: Operation Manual

    MD-X60H OPERATION MANUALNAMES OF PARTS – 8 –...
  • Page 9 MD-X60H – 9 –...

  • Page 10: Disassembly

    MD-X60H DISASSEMBLY STEP REMOVAL PROCEDURE FIGURE Caution on Disassembly The disassembling the machine or assembling it after CD Mechanism 1. Screw ....(V1) x7 12-1 repair, observe the following instructions so as to ensure 2. Top Bord ... (V2) x1 3.
  • Page 11 MD-X60H (C2) x2 (J1) x1 ø3 x10mm Front Panel ø3 x10mm Front Panel (C1) x6 (J1) x1 (D3) x1 ø1.7 x3mm CD Chenger Pull Block (H1) x1 Pull ø3 x10mm (D3) x2 MD Holder Pull Pull (D2) x6 (D1) x1 ø3 x10mm...
  • Page 12 MD-X60H (V3) x1 Push (V1) x2 (V5) x1 ø2 x7mm ø2.6 x12mm Pawl (V6) x1 (V7) x1 Spring Mechanism (V2) x1 (V8) x4 (V5) x2 ø2.6 x10mm ø2 x6mm (V1) x1 ø3 x10mm PWB-B8 (V1) x2 ø3 x8mm Turn clockwise the...
  • Page 13 MD-X60H MD Mechanism (Y1)x4 ø1.7x8.9mm Figure 13-1 SPEAKER STEP REMOVAL PROCEDURE FIGURE Speaker 1. Net ..... (A1) x1 13-2 2. Front Panel ..(A2) x1 3. Screw ....(A3) x10 13-3 SPEAKER Super Tweeter Front Panel ( A2 ) x1...

  • Page 14: Removing And Reinstalling The Main Parts

    MD-X60H REMOVING AND REINSTALLING THE MAIN PARTS MD MECHANISM SECTION (A1)x1 ø1.7x5mm Perform steps 1 to 9,21 and 23 of the disassembly method to remove the MD mechanism.(Refering to p.10~13) How to remove the magnetic head (See Fig. 14-1) Magnetic Head 1.
  • Page 15 MD-X60H How to remove the sled motor/loading motor (D1)x2 (D1)x2 (See Fig. 15-1) Ø1.7x2mm Ø1.7x2mm 1. Remove the screws (D1) x 4 pcs., and remove the sled motor/loading motor. Caution: Be careful so that the gear is not damaged. Gear (The damaged gear emits noise during searching.)

  • Page 16: Cd Mechanism Section

    MD-X60H CD MECHANISM SECTION (A1) x2 ø2.6 x5mm For the procedure to remove the CD mechanism from the Stop Washer (A3) x1 main unit, refer to Disassembling Procedure, Steps 1~3, and 20. (p.10~12). Pickup How to Remove the optical pickup (See Fig.

  • Page 17: Adjustment

    MD-X60H ADJUSTMENT TUNER SECTION fL: Low-range frequency • TEST mode setting method fH: High-renge frequency Holding down the ENTER button and TUNER (BAND) button, • AM adjustment and confirmation turn on the power. Frequency is set in the memory (initial AM signal oscillator Frequency 400 Hz, 30%, AM modulation setting) as shown in Table 17.

  • Page 18: Tape Section

    MD-X60H TAPE SECTION Adjusting the deck circuit Adjusting the mechanism Driving Force Check Position of each swich or control Torque Meter Specified Value Play:TW-2412 120 g or more VOLUME Reverse Play:TW-2422 120 g or more FUNCTION TAPE TAPE NORMAL DOLBY NR...

  • Page 19: Cd Test Mode

    MD-X60H CD TEST MODE CD test mode setting Any one of test mode can be set by pressing several buttons as follows. Holding down VOL-UP and CD DISC 3 PLAY, turn on POWER. TEST: CD operation test Test Mode Function - CD TEST mode Setting of Test mode Initialization is not performed.
  • Page 20 MD-X60H MD SECTION When the combination of mechanism/pickup and PWB was changed , set the TEST mode to perform the AUTO preliminary adjustment and AUTO adjustment, write the adjustment data in EEPROM. When EEPROM was replaced, set the TEST mode,write the EEPROM set data (p29,p30) and then perform the preliminary adjustment and AUTO adjustment, write adjustment data in EEPROM.
  • Page 21 MD-X60H 2. Test mode Test mode setting method 1. Holding down the POLE POSITION button and MD (PLAY/PAUSE) button, press the POWER button. (State A is changed to state B .) 2. Insert the playback disc 1 (high reflection disc) or recording disc 2 (low reflection disc). (State C is set.) Thus, the test mode state is set.
  • Page 22 MD-X60H 1. EJECT mode Step No. Setting Method Remarks Display Step 1 Testmode EJECT state [ _ _ E J E C T _ _ _ ] Step 2 Press oncethe CD STOP button. Max. power output state [ x p w _ _ _ _ _ _ _ ] Step 3 Press once the CD STOP button.
  • Page 23 MD-X60H 4. EEPROM setting mode a) Focus setting Step No. Setting Method Display Step 1 Testmode STOP state [ t s m Step 2 Press the CD PLAY button seventimes. [E E P R O M _ S E T] Step 3 Press once the MD PLAY button.
  • Page 24 MD-X60H c) Tracking setting Step No. Setting Method Display Step 15 Press once the CD PLAY button. [ S L C T 0 _ _ _ Step 16 Press once the CD PLAY button. [ S L C T t _ _ _ Step 17 Press once the CD PLAY button.
  • Page 25 MD-X60H G) ADJUST setting Step No. Setting Method Display Step 1 Testmode STOP state [ t s m Step 2 Press the CD PLAY button seven times. [E E P R O M _ S E T] Step 3 Press once the MD PLAY button. [ _ _ F o c u s _ _ _ ] Step 4 Press the CD PLAY button six times.
  • Page 26 MD-X60H 7. INNER mode Setting Method Step No. Remarks Display Step 1 Testmode STOP state [ t s m Step 2 Press the TRACK EDIT button. INNER menu [ _ _ I N N E R _ _ ] Step 3 Press once the MD PLAY button.

  • Page 27: Explanation Of Error Display

    MD-X60H EXPLANATION OF ERROR DISPLAY Error display Corrective action Errors Can't REC • Defect occurred successively 10 times during REC-PLAY. • Check that the disc is free from flaw, dust • As a result of occurrence of defect during REC-PLAY the and fingerprint.
  • Page 28 MD-X60H Error display Corrective action Errors BLANK MD • UTOC was read but total TNO and the number of characters of • Perform recording to check that the disc NAME was 0? is recordable disc. DEFECT • Focusing error was caused by shock during REC-PLAY.

  • Page 29: Eeprom Writing Procedure

    MD-X60H EEPROM WRTING PROCEDURE EEPROM (IC1402) writing procedure EEPROM DATA LIST 1. Procedure to replace EEPROM and to write the initial Focus setting value of microcomputer in EEPROM Item indication Setting (1) Replace EEPROM. (2) Refer to the latest EEPROM data list.
  • Page 30 MD-X60H Slide setting Control setting Item indication Setting Item indication Setting S L G C O N T R L 1 S L 2 C O N T R L 2 S L D L I M S P K L E V m...

  • Page 31: Rds Operation

    Descriptions of the PTY (Programme Type) codes, TP (Traffic System) Programme) and TA (Traffic Announcement) Eith the MD-X60H, you can search for and receive the forrowing RDS is a broadcasting service which a growing number of FM PTY, TP and TA signals.
  • Page 32 MD-X60H – 32 –...
  • Page 33 ON station(CH), without comparing field strength so can make a quick switching from TN—ON station.Preset memory takes priority of switching TN—ON station. therefore ASPM is usefull not only for PTY search but also for rapid EON switching. Anyway MD-X60H EON is basically stand-by and receiving method, along with the Guidelines for EON implementation.
  • Page 34 MD-X60H EON summary no™tice for reference 1. EON-TI/PTY EON stand-by can be set, only when EON ind. lights up. While EON ind. goes out (NO EON STATION), EON stand-by can't be set. If the EON button is pressed, then “NO EON” is indication the display.

  • Page 35: Notes On Schematic Diagram

    MD-X60H NOTES ON SCHEMATIC DIAGRAM Resistor: The indicated voltage in each section is the one measured by Digital To differentiate the units of resistors, such symbol as K and M are Multimeter between such a section and the chassis with no signal used: the symbol K means 1000 ohm and the symbol M means 1000 given.

  • Page 36: Wiring Diagram

    MD-X60H CNP301 MD MECHANISM IC14 SWITCH PWB-E FE302 FLEXIBLE PWB CW1901 SO301 CN1901 IC302 M903 CNP303 LOADING MOTOR TUNER PWB-B3 CN1601 CN1604 MD INPUT LEVEL PWB-B4 M901 M902 MD SPINDLE MD SLED COLOR TABLE MOTOR MOTOR JK151 BROWN MD IN/AUX1...
  • Page 37 MD-X60H FUSE PWB-C3 POWER AMP. PWB-C1 TO MD UNIT CNS1904 IC1401 CN1904 CN1601 MD MAIN PWB-D (BOTTOM) CNP261 CNS802A MD FLAT CABLE (42) CNS801A CN1602 CNP820 CNP810 T801 POWER TRANSFOMER CNS620 MAGNET HEAD CNS201 (40) HEAD PHONE PWB-B5 (261) M271...

  • Page 38: Block Diagram

    MD-X60H Figure 38 BLOCK DIAGRAM (1/4) – 38 –...

  • Page 39: Main Section

    MD-X60H OPTICAL PICKUP SW702A M702 SLED MOTOR M701 SPINDLE MOTOR LASER DRIVER M56748FP FOCUS/TRACKING/ SPIN/SLED LA9241M DRIVER SL– SERVO CONTROL 27 26 16.934MHz XOUT LC78625E SERVO SIGNAL CAM SWITCH SWB101 VVDD SWB102 LVDD SWB103 RVDD SWB104 OPTICAL XVDD PICKUP IC1,IC2...
  • Page 40 FM FRONT END FE301 IC303 FM IF DET./FM MPX./AM IF, AM OSC LA1832S MUTING FMOSC AM RF TUNER MUTE OSC. IC302 TC72131 PLL CONTROLLER 23 22 15 14 ICT21 LC72720...
  • Page 41 MD-X60H Figure 41 BLOCK DIAGRAM (4/4) – 41 –...

  • Page 42: Schematic Diagram / Wiring Side Of P.w.board

    MD-X60H R111 R117 1.8K TAPE SIGNAL C121 C123 C117 560P 180P(CH) 1/50 RECORD SIGNAL C119 0.0033 R115 0.5V C128 R123 R113 220/10 2.2M EQ OUT C107 C113 0.22/50 1/50 REC IN C105 C125 0.033 10/16 REC OUT C115 C111 C109 C129 0.001...
  • Page 43 MD-X60H VR105 Q103 47K(B) 2SC2412 KR R167 L-CH REC. R137 SENS. 5.6K Q113 C163 R169 0.1V R171 2SJ103 GR C167 10/16 6.8K 10/16 R159 C169 C165 R177 2.2K 4.7/50 0.22/50 REC IN R173 R179 5.6K 100K C153 R161 1/50 R181...
  • Page 44 MD-X60H IC912 IC911 BU2092F BU2092F FM SIGNAL INPUT/OUTPUT INPUT/OUTPUT C908 EXPANDER EXPANDER RA132 CD SIGNAL 100K 5.1V 5.1V MD SIGNAL RA152 EXP_DATA 5.1V EXP_DATA RA131 5.1V DATA DATA RA153 EXP_CLK 5.1V RA102 100K EXP_CLK 5.1V RECORD SIGNAL SW12 SW12 RA154 EXP_LCK2 5.1V...
  • Page 45 MD-X60H MAIN PWB-A(2/4) IC921 092F 74HC00F OUTPUT NAND GATE L911 NDER 2.2 H C970 4.9V 2.5V 5.1V 4.9V 2.5V SW12 4.9V 2.5V SW11 UNA901 RA163 4.9V SW10 AUX OPT. DIG_B 4.1V DIGI IN 2.5V RA161 4.9V DB_ON/OFF PB_MUTE JPY945 RA160 0.047...
  • Page 46 MD-X60H TO MAIN PWB (2/4) TO MAIN PWB (1/4) SYSTEM CONTROL SECTION TAPE DECK SECTION P45 10-H P43 12-C MAIN PWB-A(3/4) L541 LOW PASS TUN_LCH FILTER R541 5.6K L542 C541 L_MUTE C573 0.0056 TUN_RCH 82P (CH) R542 5.6K R569 PASS...
  • Page 47 MD-X60H CHASSIS D421 JK401 1SS133 ANALOG IN/OUT Q401 R405 D422 2SC2412 KR 2.2K 1SS133 LEFT 0.7V L421 R403 R401 2.2 H 5.6K RHIGT L423 0.7V R404 2.2 H R402 LEFT R406 5.6K AUX2 2.2K Q403 L422 2.2 H KRA107 S...
  • Page 48 MD-X60H JK401 ANALOG IN/OUT AUX2 BEAT CANCEL RHIGT LEFT RHIGT LEFT SW101 RESET SW951 IC401 CHASSIS SW951 L421 Q401 C508 L423 R405 C402 R402 R421 R410 R407 R411 L422 R408 C507 R404 R406 R413 R412 C534 C403 Q403 C536 C538...
  • Page 49 MD-X60H 7 10 UNA901 DIGI IN W951 RA183 C516 1 2 3 CHASSIS IC921 CY912 W951 R568 C991 R570 L911 C508 R567 C992 C515 R569 C577 JPY945 C507 CNP960 C573 R565 C534 C532 ZD81 C530 CNP550 C528 C526 C550 R462...
  • Page 50 MD-X60H 47/16 KTA1266 GR 4.9V 4.9V 1/50 4.2V 0.01 – FIN2 – – 2.5V FIN1 2.5V EFBAL – 2.5V – – 2.5V FOSTA 2.5V DGND – TOSTA 2.5V 2.5V – 2FREQ 0.1/50 2.5V – LASER – 0.033 2.5V FSTA –...
  • Page 51 MD-X60H 100P (CH) 100P (CH) R45 1K 100P R78 1K (CH) R48 1K 16.934MHz 0.01 4.9V 100P (CH) 100P X-TAL 0.7V GENERATOR (CH) DEF1 SBCK 2.0V SFSY SUB-CODE 0.7V 3.3M VCO CLOCK OSC CONTROL EFLG 2.5V ERROR COERECT SBSY FLAG CONTROL...
  • Page 52 MD-X60H MD SLED MOTOR MD SPINDLE MOTOR M902 M901 MD MECHANISM SWITCH PWB-E LOADING MOTOR SW1953 M903 LEAD IN R1904 SW1954 R1903 PLAY SW1955 RECORD R1902 R1901 SW1956 LOADING SW1952 DERECT MD PICKUP MAGNET HEAD FLEXIBLE PWB (40) COLOR TABLE...
  • Page 53 MD-X60H TRAY SWITCH PWB-I CD SET CD IN SWB108 SWB107 CD EJECT SWB105 SWB106 CD TRAY CLOSE SPINDLE MOTOR M701 CD MOTOR PWB-H SW702A PICKUP IN RECORF/PLAY BACK/ ERACE HEAD(217-1) SLED MOTOR M702 PICK UP UNIT FLEXIBLE PWB 7 6 5 4 3 2 1...
  • Page 54 MD-X60H C781-C789:220P (CH) 128 127 126 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 3 82 81 80 79 78 77 76 75 74 73 72 71 70 69...
  • Page 55 MD-X60H P_VF2 TO POWER PWB P_–31V CNP801 P_VF1 P59 8-G CNS704 SW701 SW711 VOLUME SW721 STOP SW702 SW712 VOLUME SW722 -DOWN PLAY X-BASS CD EJECT SW713 SW723 SWITCH PWB-B7 SW703 DISC1 TUNER MD REC PLAY BAND SW718 SW714 DISC1 SW704...
  • Page 56 MD-X60H CFW705 R641 VR630 INPUT LEVEL VOLUME C632 R633 R735 R718 L631 C706 RX701 R733 R636 R734 R637 SW735 TAPE>MD EDIT R719 SW734 R630 CNS630 MD>MD SW733 EDIT C633 CD>MD R709 EDIT CHASSIS CASSETTE MACHANISM CHASSIS GROUND R707 MD-INPUT LEVEL PWB-B4...
  • Page 57 MD-X60H SW724 SW722 SW725 PRE-EQ X-BASS POWER CFW701 R724 R722 C712 C711 SW721 SW723 DISPLAY PWB-B1 TUNER BAND DECK SWITCH PWB-B6 C781 R799 C782 R793 CNS706-B Q718 R795 C785 C786 C787 R797 SW736 C788 DOLBY NR Q720 C789 R798 R781...
  • Page 58 MD-X60H POWER AMP IC201 PWB-C1 STK40705 – – POWER AMP. D203 1SS133 FM SIGNAL R261 Q251 8.2K KTC3199 GR 4.5V 4.5V D201 R205 C221 R263 1SS133 Q252 1/50 FR202 KTC3199 GR C205 C207 Q297 470P 4.5V D202 KTC3199 R209 R245...
  • Page 59 MD-X60H C272 HEADPHONE PWB-B5 RELAY 220/10 RL201 R276 R271 OUL_L JK620 M271 HEADPHONES D271 FAN MOTOR D203 OUL_R 1SS133 1SS133 8.1V R272 D270 1SS133 4.5V C625 0.001 R240 D272 7.6V 1SS133 Q297 4.5V KTC3199 GR C626 Q298 R239 0.001 KTC3199 GR...
  • Page 60 MD-X60H POWER PWB-C2 Q805 D819 ZD803 D818 R805 C813 D817 FR801 D816 C808 R803 C812 R802 ZD802 11 12 CNS802A 12 13 CNS801A T801 POWER TRANSFORMER T.F801 FUSE PWB-C3 F805 T2.5A L 250V CORE (261) F804 T2A L 250V AC POWER CORD...
  • Page 61 MD-X60H TO MD UNIT POWER AMP. PWB-C1 RP841 CHASSIS R861 R863 Q880 C867 B C E B C E C821 Q863 Q823 ZD861 C832 R206 R881 R252 C831 R830 B C E R831 R862 R205 C243 C210 C833 C261 R254...
  • Page 62 MD-X60H TP1141 TP1131 C1107 C1110 0.0047 0.47 TP1142 C1106 0.47 C1119 330P 0.7V EFMAGI EFMAGC ADIPI 0.7V 1.6V TP1140 R1155 ADIPO EFMO-I EFMO-I 0.7V 1.6V TP1139 & DIFF AOUT-IN AOUT-IN 0.7V EOUT-IN EOUT-IN 0.7V ADLPFO 1.6V DIFF BOUT-IN BOUT-IN C1102 TP1138 1.6V...
  • Page 63 MD-X60H MD MAIN PWB-D R1211 C1208 0.047 Waveforms should be measured by inserting the circuit, as shown in the figure. 100K Connect an oscilloscope. TP1275 TP1210 270P 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 1.48V...
  • Page 64 MD-X60H CN1902 CN1252 Q1820 C1251 C1252 C1724 R1251 R1827 R1459 R1939 R1463 Q1253 Q1254 C1425 R1461 R1734 C1460 R1807 R1223 R1806 IC1251 C1704 J1720 Q1804 J1921 C1716 R1964 R1968 IC1916 IC1701 R1717 IC1907 Q1701 C1717 C1700 R1714 C1952 C1955 R1715...
  • Page 65 MD-X60H • Through-hole where the top, bottom and +B patterns are connected. • Through-hole where the top, bottom and ground patterns are connected. • Through-hole where the top, and bottom patterns are connected. TP1518 TP1516 JC121 TP1504 TP1519 TP1520 TP1524...
  • Page 66 MD-X60H VD301-1 C343 AM ANT. KV1236Z23F 33P(CH) L354 R319 C342 R358 0.022 100K 8.2K VR351 T302 10K(B) C332 C323 L353 C338 0.022 FM MUTE 0.022 0.001 LEVEL LOW PA FILTER D303 R350 CHASSIS 1SS133 2.7K C367 1/50 D304 24 23 22...
  • Page 67 MD-X60H QT21 KTC3199 GR RT34 RT36 5.2V RT37 RT35 (0V) 220K 220K 220K 2.6V (0V) (0V) RT26 RT30 RT28 R357 470K LT22 C373 L354 2.2 H CT28 0.018 R363 47/10 100K CT29 C371 0.022 1/50 MUTING 24 23 22 21...
  • Page 68 MD-X60H CT23 RT30 C302 RT29 RT32 RT37 RT28 RT33 RT36 RT34 RT35 R366 CT37 XT21 Q354 CT26 R377 CHASSIS CHASSIS LT22 R361 CNP303 C371 C374 C373 R370 X351 C368 C369 R357 R356 C356 C354 R352 ZD351 C365 C396 CF352 R351...

  • Page 69: Waveforms Of Cd Circuit

    MD-X60H WAVEFORMS OF CD CIRCUIT STOP PLAY FOCUS SERCH 0.5ms 0.50 V 10.0 V IC1 20 F.E 0.5ms 10.0 V 0.5ms 5.0 V 0.50 V IC1 54 DRF 0.5ms 1.00 V NORMAL DISC 0.5ms TN0=01 1.00 V 20ms PLAY 1.00 V 0.5ms...

  • Page 70: Waveforms Of Md Circuit

    MD-X60H WAVEFORMS OF MD CIRCUIT EFM (PLAYBACK DISC) PLAY Stopped MODISC (NORMAL PLAY) NORM 100M S/s Stopped CH1 500mV 500ns/div CH1 =500mV CH2 =500mV CH4 =2V DC 10:1 500 s/div Filter SMOOTH ON BW FULL Offset 0.0000V 0.000V TP1112 TP1104 0.000V...
  • Page 71 MD-X60H PLAY PLAY (MO DISC) Stopped Stopped CH1 = 2V CH2 = 2V CH1 = 2V CH2 = 2V 5 s/div 5 s/div LRCK SYSCLK DADATA DABCK PLAY (PLAYBACK MD) Stopped Stopped CH1 = 2V CH2 = 2V CH1 = 2V...

  • Page 72: Troubleshooting (Cd Section)

    MD-X60H TROUBLESHOOTING (CD SECTION) When the CD does not function When the CD section does not operate When the objective lens of the optical pickup is dirty,this section may not operate.Clean the objective lens,and check the playback operation.When this section does not operate even after the above step is taken,check the following items.
  • Page 73 MD-X60H • The CD operation keys work. Check the FOCUS-HF system. Playback can be performed without a disc. Focus search OK Does the pickup move up and down two twice? Check the area around IC5 to CNP2. Does the output waveform of IC1 pin 16 (FD) match that...
  • Page 74 MD-X60H • Check the tracking system. Check the waveform of IC1 pin 7 (TE). Check the periphery of IC1 pin 8 to pin The waveform shown in Figure 74-1 Tracking servo is inoperative. appears, and no disc state appears soon.
  • Page 75 MD-X60H • Although HF waveform is normal and time indication is normal, no sound is not output. Check the IC2 pin 58 (EFLG). Usually, the number of pulses of flawless disc is 100 pulses/sec or less. Check the IC2 pin 56.

  • Page 76: Troubleshooting (Md Section)

    MD-X60H TROUBLE SHOOTING (MD SECTION) When MD fails to operate If the objective lens of optical pickup is contaminated, MD may fail to operate. At first, clean the objective lens to check playback operation. If MD fails persistently to operate, perform checks as follows.
  • Page 77 MD-X60H • Disc loading is not normal. Is disc loaded when it is inserted? Check CN1601 and SW1956. Is the pin 4 of CN1601 set to L state? Is change observed on the pin 23 or 24 of IC1601? Check IC1401.
  • Page 78 MD-X60H • Normal playback When it has been confirmed that EEPROM value is normal in the TEST mode Is initialization performed normally when high reflection disc is Does the playback time display advance? played back? Check IC1201 Does disc rotate normally?
  • Page 79 MD-X60H • Record and playback operation Insert the low reflection disc, and after verifying the audio output in the normal mode playback set the record/playback TEST mode Recording from start address cannot be performed. Check whether the disc is record-prohibited.
  • Page 80 MD-X60H • Disc motor fails to run Check soldering joint and parts of pins 24 and 25 of IC1201, and Does waveform appear on the pins 24 and 25 of IC1201 in the peripheral circuit. TEST mode focus gain coarse adjustment step?

  • Page 81: Function Table Of Ic

    MD-X60H FUNCTION TABLE OF IC IC901 RH-iX2757AFZZ:System Control Micon (1/4) Active Setting Terminal Name Port Name Input/Output Function Pin No. Level in Reset P60/A16 Output TAPE mechanism solenoid control. "H" state: Solenoid ON MOTOR P61/A17 Output TAPE mechanism motor control. "H" state: Motor drive...
  • Page 82 MD-X60H IC901 RH-iX2757AFZZ:System Control Micon (2/4) Setting Active Port Name Input/Output Function Pin No. Terminal Name in Reset Level TRAY MOTOR Output TA7291S IN1 control. Refer to the true value table. For Nch open drain, the external pull-up is required...
  • Page 83 MD-X60H IC901 RH-iX2757AFZZ:System Control Micon (3/4) Active Setting Input/Output Terminal Name Port Name Function Pin No. in Reset Level SPEANA-Lch P10/AN10 Input – – AOUT input of Lch side BA3835S. A/D input SPEANA-Lch P11/ANI1 Input – – AUTO input of Rch side BA3835S. A/D input...
  • Page 84 MD-X60H IC901 RH-iX2757AFZZ:System Control Micon (4/4) Setting Active Input/Output Pin No. Terminal Name Port Name Function Level in Reset APSS Detection P51/A9 Input Detection of APSS signal. Detection by switching L to H only in APSS operation mode. RUN PULSE...
  • Page 85 MD-X60H IC951,952 VHiBA3835F/-1 (BA3835F):Speana,Band Pass Filter BIASC BIAS AOUT VREFC VREF TEST REFFERENCE CURRENT RREF N.C. N.C. 105Hz PEAK HOLD DIFOUT 340Hz PEAK HOLD 1kHz PEAK N.C. N.C. HOLD 3.4kHz PEAK HOLD PEAK 10.5kHz HOLD Figure 85-1 BLOCK DIAGRAM OF IC...

  • Page 86: Parts Guide

    “HOW TO ORDER REPLACEMENT PARTS” To have your order filled promptly and correctly, please furnish the For U.S.A. only following information. Contact your nearest SHARP Parts Distributor to order. 1. MODEL NUMBER 2. REF. No. 3. PART NO. 4. DESCRIPTION For location of SHARP Parts Distributor, Please call Toll-Free;...

Table of Contents