Hdmi Control; Making The Hdmi Control Connections - Pioneer LX01 Operating Instructions Manual

HDMI Control

09
Chapter 9
HDMI Control
Important
• The KURO LINK function name used on the web and
in catalogues is referred to as HDMI Control in the
operating instructions and on the product.
SYSTEM
• Press to set the remote control to receiver
CONTROL
control mode in order to operate the receiver
subwoofer (make sure that the LCD displays the
SYSTEM screen, as shown below).
By connecting this unit to an HDMI Control-compatible
Pioneer Flat Screen TV or the HDD/DVD recorder with an
HDMI cable, you can control this unit from the remote
control of a connected Flat Screen TV, as well as have the
connected Flat Screen TV automatically change inputs in
response to operations carried out on this unit.
Refer to the operating instructions for your Flat Screen TV
for more information about which operations can be
carried out by connecting via HDMI cable.
• You cannot use this function with components that
do not support HDMI Control.
• We cannot guarantee this unit will work with HDMI
Control-compatible components other than those
made by Pioneer.
44
En
SYSTEM
ADV. F.S.
SURR
SURR SURR

Making the HDMI Control connections

You can use synchronized operation for a connected Flat
Screen TV and up to three other components (including
a maximum of two recorders or players).
Be sure to connect the Flat Screen TV's audio cable to the
audio input of this unit.
• HDMI Control may not operate properly if you do not
use a High Speed HDMI cable.
• Requires connection of audio cables and additional
settings. For details see Audio input settings from TVs
(TV Input) on page 40.
DIGITAL
AUDIO OUT
HDMI OUT COAXIAL
ANTENNA(DIGITAL)
OUT IN
5 V 30 mA
HDMI
OUT
Rear panel
HDMI
OUT IN 3 IN 2 IN 1
OUT
SYSTEM
To HDMI input
HDMI Control-compatible
Pioneer Flat Screen TV
AC IN
HDD/DVD Recorder
SDVR-LX70D
Receiver subwoofer
Side panel
ANTENNA
AM LOOP
1 OUT 2
IN 1 IN 2
CONTROL OPTICAL
DIGITAL
From digital audio
output (optical)