Preparation For Disassembly; Battery - NEC SX Service And Reference Manual

T
Label all removed connectors. Note where the connector goes and in
what position it was installed.

Preparation for Disassembly

Turn off and disconnect all power and all options, including the AC adapter (if
connected) and remove the battery, VersaBay III device and memory module
bay cover to ready the notebook for disassembly.

Battery

Remove the battery pack installed in the NEC Versa SX system as follows.
Note:
which they are designed. Also, installing another
manufacturer's battery, or using a combination of very old
and new batteries can deteriorate battery and equipment
performance.
1. Close the LCD panel and turn the system over.
2. Slide the battery release latch as shown below.
3. Continue to hold the battery latch and lift the edge of the battery out of the
notebook as shown next.
Use the batteries in the NEC Versa computer for
Battery release latch
Disassembly and Reassembly 3-3