Bosch PLE-SDT Installation And Operation Manual page 28

28 en | Troubleshooting
Problem
No audio output sound.
The audio output sound is
distorted or full of noise.
PLE-SDT_OM | V1.0 | 2012.02
Possible cause
The audio output cable has
come loose or has not been
properly plugged in.
The audio output control is not
working properly.
The audio output connectors or
plugs are dirty.
The selected source is currently
in the pause or mute mode.
The audio output cable has not
been properly plugged i.n
Connectors or plugs are dirty.
Installation and Operation manual
Plena Easy Line SD Tuner BGM source
Possible solution
Plug in audio cable properly.
Check the output control setting
on the rear panel.
Wipe away dust or dirt and
reinsert the plug.
Press the play/mute button.
Connect the audio cable to the
line input of the amplifier.
Wipe away dust or dirt and
reinsert the plug.
Bosch Security Systems B.V.