Figure 1: Terminal setup diagram
A terminal program is required to make the software connection to the GE-DS-
242-PoE Managed Switch. Windows' Hyper Terminal program is a good choice.
The Hyper Terminal program can be accessed from the Start menu.
1.
Click START, then Programs/Accessories and then Hyper Terminal.
2.
When the following screen appears, make sure that the COM port is
configured as:
•
Baud
•
Parity
•
Data bits
•
Stop bits
•
Flow Control : None
Figure 2: COM1 properties window
P/N 1069668 • REV 1.0 • ISS 22FEB10
: 57600
: None
: 8
: 1
3 of 10