Bosch Security System User Manual page 47

Test each point by first opening and then closing the door
or window.
Check the display after testing each point. For interior
points, walking past the device once is sufficient. If any
point does not test correctly, contact your security
company for service.
6. During the Walk Test you may
want to see the points that
remain untested.
Press the View untested pts>
soft key.
7. The display shows ### pts
untested.
Press the Point information>
soft key to see information
about specific points that have
not yet been tested.
Bosch Security Systems | 9/04 | 4998122475D
Security System | User's Guide | Part II: System Commands - WALK TEST ? (COMMAND + 4 + 4)
The display changes to show
the information for that point.
Move through this list by
pressing the Next Pt> or Prev
Pt> soft keys.
Press the Exit> soft key to return to the ### points
remain to be tested screen before continuing with the
walk test.
8. When all points have been
tested, 0 points remain to be
tested. is displayed.
Press <Exit.
47