Motorola DCT3400 Series User Manual page 27

Connecting HDTV – Video Only
Connect an RF coaxial cable to the cable wall outlet and the
1
connector on the cable terminal.
CABLE IN
Connect the HDTV using component video, HDMI, or IEEE 1394.
2
Component video (Y Pb Pr)
Connect the component video cables to the Y, Pb, and Pr connectors on
your cable terminal and the HDTV.
This connection carries video only. To connect the audio connections for
your HDTV, refer to the following page. To connect your audio
connections for a home theater receiver, refer to "Connecting To an A/V
Receiver – Audio Only."
HDMI
If your HDTV has a HDMI input, connect an HDMI cable less than 65 feet
long to the
HDMI OUT
If you use the TV as the primary audio source or your home theater
receiver has an HDMI input and output, the HDMI connection carries
video and audio.
If your TV has a DVI input, you can use an HDMI-to-DVI converter cable
to connect to the DCT3412
For information on configuring your DCT3412 settings, see "Optimizing
Your Cable Terminal for High-Definition TV."
IEEE 1394
If your HDTV has an IEEE 1394 connector, you can connect an IEEE
1394 cable to the
terminal.
If you use the TV as the primary audio source, the IEEE 1394 connection
carries video and audio.
If you use the IEEE 1394 connection, on-screen graphics cannot display.
connector on your HDTV and the DCT3412.
connector.
HDMI
connector on your HDTV and the cable
1394
IEEE
DCT3400 Series User Guide
21