Operation; Microphone; Attendance Led - Bosch DCN-DS Installation And Operation Manual

DCN-D Conference Delegate Units
8

Operation

Refer to the Quick Reference Card (QRC) of the used type of delegate unit for instructions
that tell you how to operate the delegate unit. See for QRC's the DCN system DVD, which
comes with the central control unit.
8.1

Microphone

The color of the LED above the microphone button shows the microphone condition.
LED color
Red (on)
Red (flashing)
Green (on)
Green (flashing)
Yellow (on)
Table 8.1 Microphone condition
NOTICE!
You can only put the delegate unit in the VIP mode with the Microphone Management
software module. Refer to the applicable DCN system software user manual for instructions
that tell you how to enable the VIP mode.
CAUTION!
For the microphones it must be avoided to bend the gooseneck more than 90 degrees or to
rotate a (bent) gooseneck. This will cause damage to the windings of the gooseneck.
8.2

Attendance LED

The LED adjacent to voting button 1 is the attendance LED.
Attendance LED
Yellow (flashing)
Yellow (on)
Table 8.2 Attendance LED
Bosch Security Systems B.V.
Condition
Microphone enabled
Last minute of speech time
Request-to-speak
First in request-to-speak list
VIP mode
Condition
The system requests
attendance registration.
The attendance registration is
confirmed.
Installation and Operation manual
Operation | en 21
F.01U.265.631 | V1.0 | 2012.03