1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DVG-5402SP
  6. User manual

D-Link DVG-5402SP User Manual

Voip router
Hide thumbs Also See for DVG-5402SP:
Table of Contents

Advertisement

Quick Links

D-Link DVG-5402SP
VoIP Router
User Manual
Building Networks for People
RECYCLABLE
2007/10/03
Ver. 1.00

Advertisement

Table of Contents
loading

Related Manuals for D-Link DVG-5402SP

Summary of Contents for D-Link DVG-5402SP

  • Page 1 D-Link DVG-5402SP VoIP Router User Manual Building Networks for People RECYCLABLE 2007/10/03 Ver. 1.00...
  • Page 2 Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of D-Link Corporation/D-Link Systems Inc.; Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

  • Page 3: Table Of Contents

    Contents 1. Introduction ................................ 4 1-1 Product Overview ............................4 1-2 Hardware Description ..........................5 2. Getting Started ..............................7 3. VoIP Router Web Configuration (continued) ....................11 3-1 SETUP..............................14 3-1-1 Internet Setup..........................14 3-1-2 VoIP Setup ............................. 18 3-1-3 LAN Settings ..........................

  • Page 4: Introduction

    A built-in 4-port switch makes it possible to connect up to 4 Ethernet-enabled computers or devices to also share your Internet connection. The DVG-5402SP can be configured a fixed IP address or it can have one dynamically assigned by DHCP or PPPoE. It adopts either the G.711, G.726, G.729A or G.723.1 voice compression format to save network bandwidth while providing real-time, toll quality voice transmission and reception.

  • Page 5: Hardware Description

    DVG-5402SP User’s Manual Telephone Interface Description 1-2 Hardware Description Front Panel Power: Power LED. A steady light indicates a proper connection to a power source. Prov./Alm.: A blinking light indicates the VoIP Router is attempting to connect with the Provisioning server.
  • Page 6 DVG-5402SP User’s Manual Telephone Interface Description Rear Panel Line: Connect to your original telephone line on the wall jack with RJ-11 cable. Phone Port (1-2): Connect to your phones using standard phone cabling (RJ-11). LAN: Connect to your Ethernet enabled computers using Ethernet cabling.

  • Page 7: Getting Started

    DVG-5402SP User’s Manual SETUP 2. Getting Started To access the web-based configuration utility, open a web browser such as Internet Explorer and enter the IP address of the DVG-5402SP. Open your browser type http://192.168.8.254 into the URL address box. Press the Enter or Return Key.
  • Page 8 DVG-5402SP User’s Manual SETUP Click Next The username of ADMIN and USER have been defined and locked by default. It is highly recommended to create a login password to keep your router secure. Click Next Enter a NTP server or use the default server.
  • Page 9 DVG-5402SP User’s Manual SETUP Select your Internet connection type: DHCP – Most Cable ISPs or if you are connecting the DVG-5402SP behind a router. Static IP – Select if your ISP supplied you with your IP settings. PPPoE – Most DSL ISPs.
  • Page 10 DVG-5402SP User’s Manual SETUP Setup is finished. Check the summary of your settings. To make new settings effective, you must click on the Restart button to reboot the DVG-5402SP. Click Restart. D-Link Systems, Inc.

  • Page 11: Voip Router Web Configuration (Continued)

    DVG-5402SP User’s Manual SETUP 3. VoIP Router Web Configuration (continued) During configuration, please follow the Setup Hint for some specific procedure in case the VoIP Router fails to make the changes active. Situation 1: (example: Internet Setup) Setup Hint: Select DHCP WAN Setup.
  • Page 12 DVG-5402SP User’s Manual SETUP Setup Hint: Click “Edit” to start configuration. Click “Apply” after settings. Go to “MAINTAINACE”-> “Backup and Restore” save settings and reboot the system. D-Link Systems, Inc.
  • Page 13 DVG-5402SP User’s Manual SETUP Situation 3: (example: Enable IP Filtering) Setup Hint: Click “Enable IP Filtering” check box to open the main screen. Click “Add” to enter an entry. After Adding an entry, you have to click “Apply”. Don’t forget to click “Apply” which in the filed of “Enable IP Filtering”.

  • Page 14: Setup

    DVG-5402SP User’s Manual SETUP 3-1 SETUP 3-1-1 Internet Setup WAN (Wide Area Network) Settings are used to connect to your ISP (Internet Service Provider). The WAN settings are provided to you by your ISP and oftentimes referred to as "public settings". Please select the appropriate option for your specific ISP.
  • Page 15 DVG-5402SP User’s Manual SETUP SETUP → Internet Setup SETUP → Internet Setup DHCP: Select this option if your ISP (Internet Service Provider) provides you an IP address automatically. Cable modem providers typically use dynamic assignment of IP Address. The Host Name field is optional but may be required by some Internet Service Providers.
  • Page 16 DVG-5402SP User’s Manual SETUP SETUP → Internet Setup PPPoE: Select this option if your ISP requires you to use a PPPoE (Point-to-Point Protocol over Ethernet) connection. Enter the PPPoE Account, PPPoE Password and re-enter Password to confirm. SETUP → Internet Setup PPTP: Point-to-Point Tunneling Protocol (PPTP) is a WAN connection.
  • Page 17 DVG-5402SP User’s Manual SETUP SETUP → Internet Setup BigPond: Dynamic IP Address for BigPond is a WAN connection used in Australia. Enter the username and password for the BigPond account and the login server if required. SETUP → Internet Setup Domain Name Server Assignment: Select Auto or Manual to get the IP address of Domain Name Server assigned by ISP or manually.

  • Page 18: Voip Setup

    DVG-5402SP User’s Manual SETUP SETUP → Internet Setup Factory Default MAC Address: The original MAC address of the VoIP Router. Your MAC Address: It is left blank as you log-in via the WAN port. Current MAC Address: It shows the current MAC Address if you ever used the different MAC address from Factory Default MAC Address.
  • Page 19 DVG-5402SP User’s Manual SETUP SETUP → VoIP Setup Enable Support of SIP Proxy Server / Soft Switch: Check the box to register the VoIP Router with SIP proxy server or soft switch. ITSP Name: Enter the name of ITSP. SETUP → VoIP Setup FXS Representative Number registers to Proxy: Number: Enter the representative number for Line 1 and Line 2.
  • Page 20 DVG-5402SP User’s Manual SETUP SETUP → VoIP Setup Each line registers to Proxy independently: Number: Enter the number, text or number and text in this field. It is the Caller ID for the called party when you make a VoIP call. If you register the VoIP Router to a SIP proxy server, then it should be the number that provided by SIP proxy server.
  • Page 21 DVG-5402SP User’s Manual SETUP SETUP → VoIP Setup Proxy Server IP/Domain: Enter the IP address or URL (Uniform Resource Locator) of SIP proxy server or soft switch. Proxy Server Port: Enter the SIP proxy server’s listening port for the SIP in this field. Leave this field to the default if your VoIP Service Provider did not give you a server port number for SIP.
  • Page 22 DVG-5402SP User’s Manual SETUP SETUP → VoIP Setup Outbound Proxy Support: Check the box to send all SIP packets to the destined outbound proxy server. An outbound proxy server handles SIP call signaling as a standard SIP proxy server would do.
  • Page 23 DVG-5402SP User’s Manual SETUP SETUP → VoIP Setup The rule of dialing of inviting to VoIP Service Providers may vary. That is, you have to configure different Digit Map for different ITSP. In this filed, you can configure individual Digit Map for each Proxy Server.
  • Page 24 DVG-5402SP User’s Manual SETUP For example (Example in Taiwan), If Server 1 is local ITSP, you can refer to Digit Map page for general settings. If Server 2 is global ITSP (VoIP STUN, free to dial to some cities free charge) you can set individual Digit Map in Number Translation field.

  • Page 25: Lan Settings

    DVG-5402SP User’s Manual SETUP 3-1-3 LAN Settings SETUP → LAN Setup Interface Mode: Select the VoIP Router serving as a Router with NAT or Bridge between WAN port and LAN port without NAT. Note: It is still accessible if LAN Interface Mode is Bridge.
  • Page 26 DVG-5402SP User’s Manual SETUP SETUP → LAN Setup Enable DHCP Server: This variable is to assign the IP address for the devices connected to LAN port of the VoIP Router. IP Pool Starting Address: Enter the starting IP address for the DHCP server's IP assignment.

  • Page 27: Time And Date

    DVG-5402SP User’s Manual SETUP 3-1-4 Time and Date SETUP → Time and Date Automatically synchronize with Internet time servers: The VoIP Router should automatically sync up with time servers. First NTP time server: Select the desired domain name of a NTP server as first priority.

  • Page 28: Advanced

    DVG-5402SP User’s Manual ADVANCED 3-2 ADVANCED 3-2-1 VoIP 3-2-1-1 Caller Filter This function allows you to accept or reject any incoming call from the IP address listed in the filter rule. The call from the IP address of SIP proxy server is always accepted, despite Deny is selected or the IP address of SIP proxy server is not in the filter rule of Allow.
  • Page 29 DVG-5402SP User’s Manual ADVANCED 3-2-1-2 Caller ID ADVANCED → VoIP → Caller ID FXS Caller ID Generation: Select DTMF or FSK to enable the caller ID display function on FXS ports. When enabled, the caller’s phone number will be displayed on your phone set when the call comes through.
  • Page 30 DVG-5402SP User’s Manual ADVANCED 3-2-1-3 Calling Features ADVANCED → VoIP → Calling Features Do Not Disturb: Check the box to reject (busy tone played) incoming calls. Unconditional Forward: Check the box to forward incoming calls to the assigned “Forwarding Number” automatically. If configured forwarding to FXO it only makes FXO hook off, but not making FXO dial out.
  • Page 31 DVG-5402SP User’s Manual ADVANCED Calling Feature Instructions: Call Hold: The call will be held after the FLASH button is pressed on the phone set. The VoIP Router will play a hold music (provided by your ITSP or VSP) to the remote end.
  • Page 32 DVG-5402SP User’s Manual ADVANCED 3-2-1-4 Codec ADVANCED → VoIP → Codec Preferred Codec Type: Select a preferred codec type for all calls. Since different voice codecs have different compression ratios, the sound quality and occupied bandwidths are also different. The factual codec may determine by the called party.
  • Page 33 DVG-5402SP User’s Manual ADVANCED 3-2-1-5 CPT/Cadence ADVANCED → VoIP → CPT / Cadence CPT # 1 Enable Setting 1: The CPT has a set of parameter table. Please adjust the CPT based on the local PSTN or PBX settings and requirements.
  • Page 34 DVG-5402SP User’s Manual ADVANCED 3-2-1-6 Digit Map Digit Map supports multiple dial plans which help users to arrange least cost route. Each Proxy Server has individual dial plan which combines the original feature of Digit Map and Speed Dial. You can use “?”...
  • Page 35 DVG-5402SP User’s Manual ADVANCED ADVANCED → VoIP → Digit Map For example, Assume Server 1 is local ITSP As you make Mobile call, it will try local ITSP as first priority. – Server 2 is VoIP STUN (ITSP, free to dial to some cities free charge) –...
  • Page 36 DVG-5402SP User’s Manual ADVANCED Methods of Digit Map: Method 1- Single mapping: Fill a short code into the Scan Code column, and enter the desired phone number into the VoIP Dial-out column. For example, Scan Code: 09 VoIP Dial-out: 0911888997...
  • Page 37 DVG-5402SP User’s Manual ADVANCED For example, Scan Code: 0% VoIP Dial-out: 1805% User Dial Length: Disable Route: VoIP VoIP Route Profile: Route # 3 Pick up the handset and dial 0423456789. The VoIP Router will dial 1805423456789 and go through Internet first and follow Route # 3.
  • Page 38 DVG-5402SP User’s Manual ADVANCED 3-2-1-7 DTMF & PULSE ADVANCED → VoIP → DTMF & PULSE Dial Wait Timeout: Enter the timeout duration after the user picks up the phone set. Inter Digits Timeout: Enter the timeout duration between the intervals of each key pressed. When exceeding the set timeout duration without entering further digits, the numbers entered will be dialed out.
  • Page 39 DVG-5402SP User’s Manual ADVANCED 3-2-1-8 Fax ADVANCED → VoIP → FAX Disable - Select it if you are not sending fax, but it is still accepted fax by the VoIP Router. T.38 Fax - Select it if you are using T.38 as the protocol for fax transmission. T.38 is used for reliable and efficient facsimile transmission over network.
  • Page 40 DVG-5402SP User’s Manual ADVANCED ADVANCED → VoIP → FAX Enable High Quality: Check the box to increase approximately two times the bandwidth in order to compensate possible loss of packet during transmission and offers a better and reliable fax quality.
  • Page 41 DVG-5402SP User’s Manual ADVANCED 3-2-1-9 Hot Line ADVANCED → VoIP → Hot Line Hot Line: Check to direct the call automatically to a pre-configured destination without any action when the FXS is off-hook. (ie. as the user picks up the phone). When the FXS is under Hot Line mode, no other phone numbers can be dialed.
  • Page 42 DVG-5402SP User’s Manual ADVANCED 3-2-1-10 Line ADVANCED → VoIP → Line Enable: Tick the check box to enable a line. If some lines are not used, disable them (Pause Function) to avoid unnecessary waiting when an incoming call is diverting to the line.
  • Page 43 DVG-5402SP User’s Manual ADVANCED ADVANCED → VoIP → Line Flash Time: Enter the time for PSTN to detect if the voltage keeps the on-hook status. PSTN Ring OFF Length: Enter the ring length detected if the remote party is on-hook from PSTN by PSTN port.
  • Page 44 DVG-5402SP User’s Manual ADVANCED ADVANCED → VoIP → Line Ring (Early Media) Time Limit[10 - 600secs]: Enter the timeout to cancel a call if no one answers the phone. Enable End of Digit Tone: Check the box to activate the function of playing a “Beep-Beep” tone to notify the user that the call is in progress.
  • Page 45 DVG-5402SP User’s Manual ADVANCED ADVANCED → VoIP → Line FXS Impedance: Select different impedance from the drop-down menu. ADVANCED → VoIP → Line This feature is a call drop standard for a VoIP Router to determine whether or not to hang up the phone.
  • Page 46 DVG-5402SP User’s Manual ADVANCED 3-2-1-11 Phone Book Phone Book: It is used for peer-to-peer communication. Some peer information needs to be added to this section prior to making peer-to-peer calls. You need to enter the phone number and the IP address of the remote peer.

  • Page 47: Sip Advanced

    DVG-5402SP User’s Manual ADVANCED 3-2-1-12 SIP Advanced ADVANCED → VoIP → SIP Advanced Listen Port UDP: Enter the VoIP Router’s listening port in this field. Leave it as default settings, unless it conflicts with ports used by other device in your network.
  • Page 48 DVG-5402SP User’s Manual ADVANCED Session Expiration: This field will set the time that the VoIP Router will allow a SIP session to remain die (without traffic) before dropping it. Session Refresh Request: Select UPDATE or re-INVITE to send refresh requests to the Server.
  • Page 49 DVG-5402SP User’s Manual ADVANCED ADVANCED → VoIP → SIP Advanced Anonymous Caller ID (CLIR): Check the box to lock the delivery of the Caller ID to the called party. VoIP Call Out Notification: Check the box to enable the function of playing a tone to notify user that the call is through VoIP.
  • Page 50 DVG-5402SP User’s Manual ADVANCED SIP CallerId Obtaining: Select the part of the SIP packet from the VoIP Router to obtain Caller ID. There are several places where the Caller ID is located. Remote-Party-Id Display Name - It is located at SIP → Remote-Party-ID → Before [<sip:] Remote-Party-Id User Name - It is located at SIP →...

  • Page 51: Access Control

    DVG-5402SP User’s Manual ADVANCED 3-2-2 Access Control 3-2-2-1 MAC Filtering Use MAC Filters to deny computers within the local area network from accessing the Internet. You can either manually add a MAC address that are connected to the VoIP Router.

  • Page 52: Firewall And Dmz

    DVG-5402SP User’s Manual ADVANCED 3-2-3 Firewall and DMZ 3-2-3-1 DMZ DMZ (Demilitarized Zone) allows the server on the LAN site to be directly exposed to the Internet for accessing data and to forward all incoming ports to the DMZ Host. Adding a client to the DMZ may expose that computer to a variety of security risks;...
  • Page 53 DVG-5402SP User’s Manual ADVANCED 3-2-3-2 DoS Prevention ADVANCED → Firewall and DMZ → DoS Prevention D-Link Systems, Inc.
  • Page 54 DVG-5402SP User’s Manual ADVANCED ADVANCED → Firewall and DMZ → DoS Prevention Enable DoS Prevention: Check the box to prevent DoS attacks from WAN or LAN. There are various types of DoS attacking. Leave settings in this field to the default if you are not familiar with it.
  • Page 55 DVG-5402SP User’s Manual ADVANCED 3-2-3-3 IP Filtering Use IP Filters to deny particular LAN IP addresses from accessing the Internet. You can deny specific port numbers or all ports for a specific IP address. The screen will display well-known ports that are defined.
  • Page 56 DVG-5402SP User’s Manual ADVANCED 3-2-3-4 Port Filtering Port filtering enables you to control all data that can be transmitted over routers. When the port used at the source end is within the defined scope, it will be filtered without transmission.
  • Page 57 DVG-5402SP User’s Manual ADVANCED 3-2-3-5 Virtual Server Enable users on Internet to access the WWW, FTP and other services from your NAT. It is also known as port forwarding. When remote users are accessing Web or FTP servers through WAN IP address, it will be routed to the server with LAN IP address.

  • Page 58: Advanced Network

    DVG-5402SP User’s Manual ADVANCED 3-2-4 Advanced Network 3-2-4-1 QOS WAN QoS ADVANCED → Advanced Network → QoS Enable WAN QoS: Check the box to guaranty the voice quality. Voice packets have the highest priority in IP networks, and the data transmission is distributed to less bandwidth.
  • Page 59 DVG-5402SP User’s Manual ADVANCED LAN QoS ADVANCED → Advanced Network → QoS Enable LAN QoS: Check the box to enable LAN QoS by Hardware. Priority: Use the drop-down menu to select Low or High for the VoIP Router to deliver the packets from LAN interface when the packets arrive at the same time.
  • Page 60 VoIP Router design, but rather a limitation of the STUN protocol. STUN Server IP/Domain and Port: Enter the IP address and listen port of the STUN server. You can set two STUN server IPs separated by a semicolon. D-Link Systems, Inc.
  • Page 61 ADVANCED → Advanced Network → STUN Inquiry NAT Type: It shows the NAT type of your router. STUN Server IP/Domain: Enter the IP address or URL of the STUN server for query. STUN Server Port: Enter the STUN Server’s listening port. D-Link Systems, Inc.
  • Page 62 Enable UPnP: Check the box to enable the VoIP Router’s IP traffic to pass through an Internet sharing device. This function only works when the Internet sharing device supports UPnP and has it enabled. Note: The “Status Current Status” page will show the status of UPnP. D-Link Systems, Inc.

  • Page 63: Maintenance

    DVG-5402SP User’s Manual MAINTENANCE 3-3 MAINTENANCE 3-3-1 Device Management MAINTENANCE → Device Management Note: There are two operating levels when entering the Web UI. Logging-in as the ADMIN allows you to change all settings. A Web UI USER only has access to some settings.

  • Page 64: Backup And Restore

    DVG-5402SP User’s Manual MAINTENANCE 3-3-2 Backup and Restore Save and Reboot MAINTENANCE → Backup and Restore Save All Settings: Click the Save All Settings check box and reboot the system after completing changes. The new settings will take effect after the VoIP Router is restarted.
  • Page 65 DVG-5402SP User’s Manual MAINTENANCE Update Settings MAINTENANCE → Backup and Restore To restore a system settings file, click on Browse to search the local hard drive for the file to be used. Once you locate the file, click Upload Settings to overwrite the current settings with the settings saved to the file.

  • Page 66: Firmware Update

    DVG-5402SP User’s Manual MAINTENANCE 3-3-3 Firmware Update The VoIP Router supports a software upgrade function from a remote server. Please consult your VoIP Service Provider for information about the following details. MAINTENANCE → Firmware Update Upgrade Server: Select the upgrade type: TFTP, FTP, or HTTP.

  • Page 67: Dynamic Dns

    DVG-5402SP User’s Manual MAINTENANCE 3-3-4 Dynamic DNS ADVANCED → Dynamic DNS Enable Dynamic DNS: Check the box to enable DDNS function. It is only necessary when the VoIP Router is set up behind an Internet sharing device that uses a dynamic IP address and does not support DDNS.

  • Page 68: Log Settings

    DVG-5402SP User’s Manual MAINTENANCE 3-3-5 Log Settings MAINTENANCE → Log Settings Enable: Check the box to send event notification messages across IP networks to the Server. Server Address: Enter the System Log Server’s IP address. Port: Enter the System Log Server’s listening port. Leave this field to the default if your VoIP Service Provider did not provide you a server port number for System Log Server.

  • Page 69: Diagnostics

    DVG-5402SP User’s Manual MAINTENANCE 3-3-6 Diagnostics Use “Ping” to verify if a remote peer is reachable. Enter a remote IP address and click “Test” to ping the remote host. The result would be shown on Result Table MAINTENANCE → Diagnostics...

  • Page 70: Provision

    DVG-5402SP User’s Manual MAINTENANCE 3-3-7 Provision Provisioning is a function that automatically updates your VoIP Router’s configuration by using a TFTP, FTP, or HTTP server located on the Internet. If you have access to such service, you will need to know the URL or IP address of the Provisioning Server.
  • Page 71 DVG-5402SP User’s Manual MAINTENANCE Provision Retry Times: Enter the retry time if a provisioning attempt fails. Retry Interval: Enter the interval for retrying. Suspend Service: Check the box to stop VoIP call service. Note: Contact your server provider if necessary.

  • Page 72: Cdr

    DVG-5402SP User’s Manual MAINTENANCE 3-3-8 CDR The user can set up a CDR Server to record call details for every phone call with TCP protocol. The present CDR provides the call event such as HOOK ON, HOOK OFF, DIALED NUMBER, DATE…recording in a text file and which can be imported to prepare an analysis report.

  • Page 73: Status

    DVG-5402SP User’s Manual STATUS 3-4 STATUS 3-4-1 Device Info STATUS → Device Info For WAN Port Information, it shows IP address, subnet mask, default gateway and DNS server. If you use PPPoE to obtain IP, you will know if the IP is obtained through this method. If IP address, subnet mask, default gateway is blank, it means that the VoIP Router does not obtain IP.

  • Page 74: Voip Status

    DVG-5402SP User’s Manual STATUS 3-4-2 VoIP Status STATUS → VoIP Status For Port Status, it includes if each port registers to Proxy successfully, the last dialed number, how many calls each port has made since the VoIP Router is start, etc.

  • Page 75: Lan Client

    DVG-5402SP User’s Manual STATUS 3-4-3 LAN Client The DHCP Clients table displayed LAN device that has already been assigned an address from DVG-5402SP. You can check if the DHCP client has obtain an IP address. STATUS → LAN Client D-Link Systems, Inc.

  • Page 76: Statistics

    DVG-5402SP User’s Manual STATUS 3-4-4 Statistics STATUS → Statistics Display the information of the last call made. Press Refresh button to get the latest RTP Packet Summary. 3-4-5 Logout If setting or parameter has been changed, remember to save the changes before you logout the configuration menu.

  • Page 77: Configuring The Voip Router Through Ivr

    DVG-5402SP User’s Manual VoIP Router Configuration-IVR 4. Configuring the VoIP Router through IVR VoIP transmits voice data (packets) via the Internet, hence the condition and status of the network environment is relatively important to the telecommunications quality. If any one of the parties involved in VoIP communications has insufficient bandwidth or frequent packet loss, the telecommunication quality will be poor.
  • Page 78 DVG-5402SP User’s Manual VoIP Router Configuration-IVR a new IP address) enter 192*168*1*2 (new IP address). Save Settings When all setting procedures are completed, dial 509 (Save Settings) from phone keypad. Wait for about three seconds, you should hear a voice prompt “1 (one).” You can now hang up the phone and please reboot the VoIP Router to enable the new settings.

  • Page 79: Ivr Functions Table

    DVG-5402SP User’s Manual VoIP Router Configuration-IVR 4-1-1 IVR Functions Table: Function Description Example / Notes Code 111/101 WAN Port IP address Set/Query Dial function code 114 and then dial 1 for a Static IP connection then 112/102 WAN Port Subnet Mask Set/Query setup the IP address.

  • Page 80: Ip Configuration Settings-Set The Ip Configuration Of The Wan Port

    DVG-5402SP User’s Manual VoIP Router Configuration-IVR 4-2 IP Configuration Settings—Set the IP Configuration of the WAN Port Static IP Settings Note: Complete static IP settings should include a static IP (option 1 under 114), IP address (111), Subnet Mask (112), and Default Gateway (113). Please contact your Internet Service Provider (ISP) if you have any question.
  • Page 81 DVG-5402SP User’s Manual VoIP Router Configuration-IVR Select a PPPoE After entering IVR mode, dial 114. When voice prompt plays “Enter value,” dial 3 (to select PPPoE). PPPoE Account Settings After entering IVR mode, dial 121. When voice prompt plays “Enter value”, enter the account number followed by”#”.

  • Page 82: Pppoe Character Conversion Table

    (high-lighted) of each pair of the column (“Input Key”) represents the codes to be entered for the corresponding numbers, alphabets or symbols. For example, to enter “D-Link” according to the table below, enter: 148322495451 Numbers...

  • Page 83: Dialing Principles

    DVG-5402SP User’s Manual Dialing Principles 5. Dialing Principles 5-1 Dialing Options Dial the phone number which you want to call and press # to call out immediately. Note that if the “# (pound)” not dialed, the number will be called out after 4 seconds by default. The period between number dialed and call out is named “Inter Digits Timeout”.
  • Page 84 DVG-5402SP User’s Manual Dialing Principles Start Enter a phone number (D#) Is (D#) Dial the number defined in Speed defined in Dial table? Speed Dial table Is (D#) defined in Extension table? Is (D#) defined in Phone Book table? Is (D#)

  • Page 85: Appendix

    DVG-5402SP User’s Manual Appendix Appendix Product Features • One 10/100Mbps auto-negotiation, auto-crossover RJ-45 Ethernet port • Support static IP, PPPoE, BigPond Cable and DHCP address assignment and dynamic DNS (DDNS) • QoS: IP TOS (Type of Services) and DiffServ (Differentiated Services) for both SIP signaling and RTP •...
  • Page 86 DVG-5402SP User’s Manual Appendix Telnet • Status reports: Port status Registration status Ping tests STUN/UPnP status Hardware / software information • Firmware Upgrade through TFTP, FTP and proprietary image server • Configuration Backup/Restore • Reset button (with restore factory default function) •...

Table of Contents