Get Started; Charge Power; Switch The Device On Or Off; Select Usb Connection Modes - Philips GoGear SA3CNT08 User Manual

3 Get started

Charge power

Connect
charged through the USB port of a computer.
By using the USB cable, connect the device to
a PC.

Switch the device on or off

Press and hold /
device.
to switch on or off the

Select USB connection modes

Switch on the device and connect it to a PC. A
connection mode:
Charge only mode
By default, the device is connected to a PC in
can play when you charge power.
Press or
USB storage mode
the device, select the USB storage mode. When
you switch on the USB storage mode, you
storage or Turn off USB storage.
USB debugging mode
You can use the mode for your development of
Android applications. In this mode, the device
can communicate with the PC through the USB
cable.
To switch on the USB debugging mode,
1
From the Home screen, go to
Applications.
2
In Development, select USB debugging.
» If the function is enabled, the tick box
is selected.
Connect.
Turn on USB
>
EN
11