Technical Specifications - Bosch DIVAR AN 3000 User Manual

3 | DIVAR AN 3000
3 Audio inputs
4 Audio output
5 Alarm inputs
6 RS232 connector for Dome
control
7 Power ON/OFF switch
8 Power connector
Recommended PC requirements for Web support
Operating system Windows XP, Windows Vista or Windows 7
Web browser Safari, Chrome, Firefox (QuickTime required;
no playback supported)
Internet Explorer 9 (including playback)
Processor Intel Core Duo 2.0 GHz or comparable
RAM memory 2048 MB
Free disk space 10 MB
Graphics card NVIDIA GeForce 8600 or better
Video memory 256 MB
Network interface 10/100/1000-BaseT

Technical specifications

Electrical
Rated voltage and power
External power adapter 100–240 VAC; 50-60 Hz; 1.7 A
AC input
Power adapter DC 12 VDC; 5 A
output
DVR Power input 12 VDC; 35 W, 119 BTU/h
RTC battery on main Lithium CR2032, 3 VDC
PCB
Video
Video standard PAL or NTSC (select via General Setup
menu, or auto detect on channel 1)
960H resolution support
Playback 960H: 960x576 (PAL), 960x480 (NTSC)
4CIF: 704x576 (PAL), 704x480 (NTSC)
2CIF: 704x288 (PAL), 704x240 (NTSC)
CIF: 352x288 (PAL), 352x240 (NTSC)
QCIF: 176x144 (PAL), 176x120 (NTSC)
Compression H.264
Inputs 4, 8 or 16 composite video 1 Vpp, 75 ohm,
CVBS (BNC)
Outputs 1 channel Mon. A: CVBS (BNC)
1 channel Mon. A: HDMI
1 channel Mon. A: VGA
1 channel Mon. B: CVBS (BNC)
11 HDMI output - Monitor A
12 USB connector
13 RS485 connector for Dome
control
14 Alarm outputs
15 Microphone input
16 CVBS output - Monitor B
Support for simultaneous CVBS/VGA/HDMI
output to Mon. A
Monitors
MON.A Live, playback, menus
VGA: analog RGB max. 1920x1080, 60 Hz
HDMI: digital RGB max. 1920x1080,
165 MHz
CVBS: 1 Vpp, 75 ohm, BNC (NTSC/PAL)
Resolution (MON.A) CVBS (PAL): 704x576
CVBS (NTSC): 704x480
VGA: 1920x1080, 1280x1024,
1280x720, 1024x768
HDMI: 1920x1080, 1280x1024,
1280x720, 1024x768
960H camera: 960x576 (PAL),
960x480 (NTSC)
720H camera: 704x576 (PAL),
704x480 (NTSC)
MON.B Live
CVBS: 1 Vpp, 75 ohm, BNC
Resolution (MON.B) CVBS (PAL): 704x576
CVBS (NTSC): 704x480
Audio
Inputs 4-ch RCA (for 4/8/16 channel), 200 to
3000 mV, 10 kOhm (RCA)
Output Mono RCA, 200 to 3000 mV, 5 kOhm (RCA)
MIC input Mono talk input RCA, 200 to 3000 mV,
10 kOhm (RCA)
Compression G.711A
Sample rate 8 kHz per channel
Bit rate 8-bit
Control
RS485 PTZ control port
Output signals according to RS485, max.
signal voltage -5 to +5 V
RS232 PTZ control port interface
Output signals according to EIA/TIA-232-F,
max input voltage ±10 V
Supported protocols Pelco P and D (over RS-485)
Bosch OSRD (over RS-485 or RS-232)
Alarms
Inputs 16 inputs configurable NO/NC, max. input
voltage 5 VDC
Outputs 3 relay outputs, configurable NO/NC
Relay contact Max. rated, 30 VDC, 2 A continuous or
125 VAC, 1 A (activated)