■
If the sound is distorted or too loud, try pressing the
or on the remote control.
No sound can be heard from the microphone.
■
Make sure the microphone is connected correctly. See page 29.
■
Increase the Mic Input Level. See page 29.
■
The projector is compatible with dynamic microphones. Make sure you are not using a
plug-in power microphone.
Subtitles do not appear.
■
The DVD might not include subtitles.
■
Make sure the subtitle language is not set to
You can't change the language on a DVD.
The DVD might not include multiple languages.
Problems with External Video Equipment
No picture appears on the screen.
■
Make sure the equipment is turned on.
■
Press the
button on the projector or the
■
Press the
or
You see the message
■
Make sure the equipment is turned on.
■
Make sure your cable(s) are connected correctly (see page 30).
■
Press the
button on the projector or the
the external video source. Allow a few seconds for the projector to sync up.
button on the external equipment.
Play
.
No Signal
button on the projector
— Volume
(see page 42).
OFF
button on the remote control.
button on the remote control to select
63
Problem Solving