Table of Contents
Advertisement
Basic Operations
Control Panel
Operations of the Control Buttons
The control panel (which consists of an LCD panel and control buttons on the
front surface of the device) and browser are used to perform basic server
operations.
Use the control panel to make the system and network settings, to restart or shut
down the system, and to display the system's operational status.
For details on the control panel menu, refer to Chapter 3, "Using the Control
Panel" (page 24).
By using the control panel, the following tasks can be accomplished.
• Configure network related settings
• Restart or shut down the system
• Set messages to display on the LCD panel when the server is idle
• Check system's operational status
• Check the usage condition of the hard disk.
Note
Some of the setups and operations such as, network settings, restart/shutdown,
system status and hard disk condition monitoring can be performed through a
browser.
The following buttons are on the control panel. Use these buttons to operate the
Control Panel Menu.
[MENU] button
The Control Panel Menu appears.
b b b b button, B B B B button
Moves the cursor left and right. These buttons are used to select values and to
specify the positions of letters and numbers.
v v v v button, V V V V button
These buttons are used to select a menu and to input letters and numbers.
• Press v to move to the previous menu, and V to move to the next menu.
• Press v to cycle forwards through letters and numbers one at a time, and V to
cycle backwards.
[ENTER] button
This button is used to finalize the displayed menu or value, and to execute
operations.
• Finalizes or executes the displayed menu or operation.
• Saves the values.
Note
Input a space to delete an unwanted character.
[CANCEL] button
Aborts the current operation and returns to the previous menu.
11
Chapter 2 Basic Use
Advertisement
Table of Contents
