Fujitsu M2010 Operating Manual
Fujitsu M2010 Operating Manual

Fujitsu M2010 Operating Manual

Mini notebook
Hide thumbs Also See for M2010:
Table of Contents

Advertisement

Mini Notebook Fujitsu M2010
Operating Manual

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu M2010

  • Page 1 Mini Notebook Fujitsu M2010 Operating Manual...
  • Page 2 Are there ..any technical questions or problems? Please contact: • our Hotline/Help Desk (see Help Desk list or visit: "http://ts.fujitsu.com/helpdesk") • your sales partner • your sales office Additional information is contained in the Help Desk list and the "Warranty" manual.
  • Page 4 Published by Fujitsu Technology Solutions GmbH A26391-K245-Z220-1-7619, Edition 1 2009/06 Produced by XEROX Global Services...
  • Page 5 Mini Notebook Fujitsu M2010 Operating Manual Innovative technology Ports and Operating Elements Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical specification...
  • Page 6 All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright © Fujitsu Technology Solutions GmbH 2009 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole.
  • Page 7: Table Of Contents

    Contents Contents Innovative technology ..............Further information .
  • Page 8 Fujitsu M2010 ........
  • Page 9 Contents Disposal and recycling ..............52 Declarations of Conformity .
  • Page 10 Contents A26391-K245-Z220-1-7619, edition 1...
  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet website. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.
  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://ts.fujitsu.com" • Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual indicates a key on the keyboard, e.g:...
  • Page 13: Ports And Operating Elements

    Ports and Operating Elements Ports and Operating Elements This chapter presents the individual hardware components of your device. It gives an overview of the displays and connections of the device. Please familiarise yourself with these components before you start to work with the device. 1 = Microphone 11 = LAN port 2 = Webcam...
  • Page 14: Important Notes

    Important notes Important notes Importantnotes Notes This chapter contains essential safety information which must be followed when working with your notebook. Other notes also provide useful information which will help you with your notebook. Safety information Safetyinformation Notes Please note the information provided in the "Safety" manual and in the following safety notes.
  • Page 15: Information Sources

    Accessories kit, on your Information on restoring (printed and/or PDF file) the operating system, notebook or on our website at: drivers, manuals and special "http://ts.fujitsu.com/support/" software "Preparing for use" manual Instructions on preparing (printed) the device before using it for the first time, technical...
  • Page 16: Travelling With Your Notebook

    Important notes Travelling with your notebook Mobile operation Notes Transportation Notebook Please observe the points listed below when travelling with your notebook. Before you travel ► Back up important data stored on your hard disk. Notebook Travel,notebook ► Switch off the radio component for data security reasons. With data traffic via a wireless connection, it is also possible for unauthorised third parties to receive data.
  • Page 17: Cleaning The Notebook

    Important notes Cleaning the notebook Do not clean any interior parts yourself; leave this job to a service technician. Only use cleaning products designed for computers. Normal household cleaners and polishes can damage the markings on the keyboard and the device, the paintwork or the notebook itself.
  • Page 18: First-Time Setup Of Your Device

    First-time setup of your device First-time setup of your device First-timesetup Gettingstarted If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. A system test is performed when your device is first switched on. Various messages can appear.
  • Page 19: Selecting A Location

    First-time setup of your device Selecting a location Selectinga location Device Mainsadapter Select a suitable location for the device before setting it up. Follow the instructions below when doing so: • Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result.
  • Page 20: Switching On The Device For The First Time

    Consult the operating system manual if anything is unclear about the requested input data. If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://ts.fujitsu.com/support". A26391-K245-Z220-1-7619, edition 1...
  • Page 21: Working With The Notebook

    Working with the notebook Working with the notebook Notebook,operation Notebook This chapter describes the basics for operating your notebook. Please read the chapter entitled "Connecting external devices", Page 33 for instructions on how to connect devices such as a mouse and a printer to the notebook. Please refer to the notes in "Important notes", Page Switching on the notebook...
  • Page 22: Switching Off The Notebook

    Working with the notebook Switching off the notebook Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system properly (in Windows via the Start menu by clicking Start Symbol –...
  • Page 23: Status Indicators

    Working with the notebook Status indicators Statusindicators The status indicators provide information about the status of the power supply, the drives and the keyboard functions. Three indicators are visible when the device is closed: radio components, power-on indicator, battery indicator. Radio components Power-on indicator/standby (status indicator...
  • Page 24: Keyboard

    Working with the notebook Battery indicator / power connection The state of charge of the battery is shown by the battery indicator. With mains adapter connected: • The indicator lights up blue: The battery is charged. • The indicator lights up orange: The battery is being charged. •...
  • Page 25 Working with the notebook Alt Gr Illustration (general example of German keyboard layout) Backspace key The Backspace key deletes the character to the left of the cursor. Backspace Backspace Tab key The Tab key moves the cursor to the next tab stop. Tabkey Enter key (return) The Enter key terminates a command line.
  • Page 26: Virtual Numeric Keypad

    Working with the notebook Fn button key enables the special functions indicated on overlay keys (see "Key combinations", Page 16). Fnkey Cursor keys The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Start key...
  • Page 27 Working with the notebook Key combinations are entered as follows: ► Press the first key in the combination and keep it pressed. ► While holding the first key down, press the other key or keys in the combination. Switching the loudspeakers on and off This key combination switches your notebook’s loudspeakers off and on.
  • Page 28: Country And Keyboard Settings

    Working with the notebook Perform warm reboot This key combination restarts the notebook. First press and hold Ctrl SysRq both the keys, then press the key. First of Ctrl all the Task Manager will be displayed. You must then press all three keys again to reboot.
  • Page 29: Touchpad And Touchpad Buttons

    Working with the notebook Touchpad and touchpad buttons Keep the touchpad clean. Protect it from dirt, liquids, and grease. Touchpad Buttons Do not use the touchpad if your fingers are dirty. Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons. 1 = Touchpad 2 = Touchpad buttons The touchpad enables you to move the mouse pointer on the screen.
  • Page 30: Lcd Screen

    LCDscreen Notes High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution which differs from the specification can result in an unclear picture.
  • Page 31: Webcam

    Working with the notebook Webcam Webcam Your notebook is equipped with a webcam. Depending on the software used, you can use it to take pictures, record video clips or take part in web chats. • The picture quality depends on the lighting conditions and the software being used. •...
  • Page 32: Charging, Caring For And Maintaining The Battery

    If you do not use the batteries for long periods, remove them from the notebook. Never store the batteries in the device. Removing and installing the battery Only use rechargeable batteries approved by Fujitsu Technology Solutions for your notebook. Never use force when fitting or removing a battery.
  • Page 33: Removing A Battery

    Working with the notebook Removing a battery ► Prepare for removal, see chapter "Preparing to remove components", Page ► Push the battery lock (1) in the direction of the arrow. ► Slide the battery lock in the direction of the arrow (2) and hold it in place. ►...
  • Page 34: Installing A Battery

    Working with the notebook Installing a battery ► Carefully push the battery into the battery compartment until it is felt to engage (1). ► Return the battery lock to its original position (2). ► Complete the removal, see chapter "Finishing component removal", Page A26391-K245-Z220-1-7619, edition 1...
  • Page 35: Using The Power-Management Features

    Working with the notebook Using the power-management features Power Power Battery The notebook uses less power when the available power-management features are used. You will then be able to work longer when using the battery before having to recharge it. Power efficiency is increased and environmental pollution reduced.
  • Page 36: Memory Cards

    Working with the notebook Memory cards Slot Your notebook is equipped with an integrated memory card reader. It supports the following formats: Without adapter: • Secure Digital (SD card) Memorycard SecureDigital • SDHC • MultiMediaCard (MMC) MemoryCard MultiMediaCard • Memory Stick / Memory Stick pro (Sony®) MemoryCard MemoryStickPro With adapter:...
  • Page 37: Removing The Memory Card

    Working with the notebook Removing the memory card Memorycard In order to protect your data, always follow the correct procedure for removing the card outlined below. You can stop the memory card via the corresponding icon in the task bar: ►...
  • Page 38: Wireless Lan/Bluetooth Radio Components

    Working with the notebook Wireless LAN/Bluetooth radio components The installation of a wireless LAN/Bluetooth module not approved by Fujitsu Technology Solutions GmbH invalidates the permits (CE!) issued for this device. Switching the radio components on and off ► Press the key, keep it pressed, then press the key.
  • Page 39: Ethernet And Lan

    Working with the notebook Ethernet and LAN EthernetLAN The internal network module of your notebook supports Ethernet LAN. You can use it to establish a connection to a local network (LAN = Local Area Network). ► Connect the network cable to the LAN port of the notebook (1).
  • Page 40: Security Functions

    Security functions Security functions Securityfunctions Your notebook has several security features that you can use to secure your system from unauthorised access. This chapter explains how to use each function, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out and unable to access your data.
  • Page 41 Security functions Setting supervisor and user password ► Start the BIOS Setup Utility and go to the Security menu. ► Select the Set Supervisor Password field and press the Enter key. With Enter new Password: you are asked to enter a password. ►...
  • Page 42: Password Protection For Booting Of The Operating System

    Security functions Password protection for booting of the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Setting supervisor and user password", Page 31), you can also prevent booting of the operating system. Operating system Activating system protection ►...
  • Page 43: Connecting External Devices

    Connecting external devices Connecting external devices Always refer to the safety information provided in "Important notes", Page 4 before connecting or disconnecting any devices to or from your notebook. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm.
  • Page 44: Connecting An External Monitor

    Connecting external devices Connecting an external monitor You can connect an external monitor to the analogue VGA monitor connection of the notebook. Screen output is limited to a maximum of two screens at any one time (see "Key combinations", Page 16, section "Toggle output screen").
  • Page 45: Connecting Usb Devices

    Connecting external devices Connecting USB devices USBports On the USB ports you can connect external devices that also have a USB port (e.g. a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running.
  • Page 46: Connecting External Audio Devices

    Connecting external devices Connecting external audio devices Microphone port / Line In Audiodevices,connecting Audioports Microphone,connecting The microphone port/Line In allows you to connect an external microphone, a MiniDisc player, MP3 player, CD player or a tape deck to your notebook. ►...
  • Page 47: Removing And Installing Components During Servicing

    Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty. Servicing Components If you remove and install components without consulting the Hotline/Help Desk, then the warranty of your notebook will be voided.
  • Page 48: Preparing To Remove Components

    Removing and installing components during servicing Preparing to remove components If you are going to remove or change system components, prepare for the removal as follows: Please observe the safety information in chapter "Important notes", Page Remove the power plug from the mains outlet ! ►...
  • Page 49: Removing A Cover

    Removing and installing components during servicing Removing a cover ► Remove the "Torx 6" M2 x 4 mm screws (1). Keep the screws carefully in a safe place. If you are removing several components at the same time, keep the screws for the individual components separate from each other.
  • Page 50: Installing A Memory Module

    Removing and installing components during servicing Installing a memory module ► Insert the memory module with the contacts and the recess (a) facing the slot (1). Memory expansion Memory module ► Carefully push the memory module downwards until you feel it click into place (2).
  • Page 51 Removing and installing components during servicing ► Remove the "Torx 6" M2 x 2.5 mm screws (1). Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separate from each other.
  • Page 52: Installing A Hard Disk

    Removing and installing components during servicing Installing a hard disk If you remove several components at the same time, keep the screws for the individual components separate from each other and make sure that you use the correct screws. If you install the wrong screws, components may be damaged. ►...
  • Page 53: Finishing Component Removal

    Removing and installing components during servicing Finishing component removal After you have removed or changed the system components as you required, please prepare your device for operation again as follows: ► Turn the notebook the right way up again and place it on a flat surface. ►...
  • Page 54: Settings In Bios Setup Utility

    Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility System settings,BIOSSetupUtility Configuration,BIOSSetupUtility Setup System configuration Hardwareconfiguration The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the notebook. When it is delivered, the notebook is set to factory default settings. You can change these settings in BIOS Setup Utility.
  • Page 55: Exiting Bios Setup Utility

    Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes - save changes and exit BIOS Setup Utility ►...
  • Page 56: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://ts.fujitsu.com/support/downloads.html"...
  • Page 57: Help If Problems Occur

    The SystemDiagnostics program is already installed on devices which were delivered with a Windows operating system. ► To start the SystemDiagnostics program, click on Startsymbol - Program - Fujitsu - SystemDiagnostics. ► If a problem is found during a test run, the SystemDiagnostics program outputs a code (e.g.
  • Page 58: When Certain Characters Are Entered On The Keyboard, Only Numerals Are Written

    Troubleshooting and tips When certain characters are entered on the keyboard, only numerals are written Abeepsounds everysecond Cause Troubleshooting The virtual numeric keypad of your device is ► Press the key combination activated, see "Virtual numeric keypad", Page 16 The notebook’s LCD screen remains blank LCDscreen LCDscreenistoodark Cause...
  • Page 59: The External Monitor Is Blank Or The Image Is Unstable

    Troubleshooting and tips The external monitor is blank or the image is unstable Screen Monitor Cause Troubleshooting The wrong external monitor has been selected ► Terminate the application program in or the wrong screen resolution has been set for Windows by pressing .
  • Page 60: The Notebook Stops Working

    Troubleshooting and tips The notebook stops working Notebook Energysaving mode Cause Troubleshooting Notebook is in energy saving mode. ► Leave energy saving mode. An application programme has caused the ► Close the application program or restart malfunction. the notebook (by restarting the operating system or switching the device off and back on again).
  • Page 61: Technical Specification

    Approved memory modules 1 GByte or 2 GByte DDR2 SDRAM SO-DIMM The data sheet for the device provides further technical data. You will find the data sheet on your device or on the Internet under "http://ts.fujitsu.com/support". Mains adapter Technicaldata Electrical data...
  • Page 62: Manufacturer's Notes

    Declarationofconformity The "Declarations of Conformity" concerning the device can be found at our Internet address: "http://ts.fujitsu.com". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. CE marking...
  • Page 63: Index

    Index Index cleaning 7 Ctrl+Alt+Del 18 A beep sounds every second 48 Alt+Tab 17 Cursor control keys 16 Cursor keys 16 Audio devices, connecting 36 Audio ports 36 Date is incorrect 47 Back tab 18 Declaration of conformity 52 Backspace 15 Device setting up 9 Bass loudspeaker (subwoofer) 27...
  • Page 64 Index Microphone 27 Important notes 4 Microphone, connecting 36 Mobile operation 6 Incorrect date/time 47 Indicator Monitor Caps Lock 14 connecting 34 drifting display 49 drive 14 Num Lock 14 refresh rate 34 remains blank 48 Information sources 5 Monitor port see VGA connection socket 34 MultiMediaCard 26 Key combinations 16...
  • Page 65 Index Power power consumption 25 Tab key 15 Technical data power-management features 25 Power-on indicator 13 mains adapter 51 Preparing for operation 9 Technical specification 51 notebook 51 Printer does not print 50 The radio connection to a network does not work 50 Time not correct 47 Rechargeable battery...

Table of Contents