Configuration - Motorola BLE Series Installation And Operation Manual

2 2 2 2 - - - - 2 2 2 2 O v e r v i e w
C o n f i g u r a t i o n
The BLE*/* is fully configured in the Motorola factory per customer request. It is recommended
that you verify the configuration listed on the outside of the shipping carton with the
configuration that you ordered. The shipped configuration is also noted in a label on the side of
the RF chassis.
Figure 2-2 illustrates the BLE*/* configuration notation:
F i g u r e 2 - 2
B L E * / * c o n f i g u r a t o r
Key Frequency Range
75E 5-30 MHz, 47-750 MHz
75S 5-40 MHz, 52-750 MHz
75K 5-42 MHz, 54-750 MHz
75J 5-55 MHz, 70-750 MHz
75A 5-65 MHz, 85-750 MHz
75M 5-80 MHz, 108-750 MHz
75T 10-47 MHz, 54-750 MHz
87E 5-30 MHz, 47-870 MHz
87S 5-40 MHz, 52-870 MHz
87K 5-42 MHz, 54-870 MHz
87J 5-55 MHz, 70-870 MHz
87A 5-65 MHz, 85-870 MHz
87M 5-80 MHz, 108-870 MHz
87T 10-47 MHz, 54-870 MHz
Key Hybrid Technology
X Standard (High Gain)
G E-GaAs (High Output)
/
BLE
Key Level Control
X None
T TDU
A ADU-499.25/S
B ADU-439.25/S
C ADU-403.25/S
D ADU-445.25/S
E ADU-549.00/S
F ADU-325.25/S
Key Return Amp w/ JXP-ZXT
X No Return
L Low Gain Hybrid
H High Gain Hybrid
P Passive Return
Key Reserved
X Reserved
B L E * / * I n s t a l l a t i o n a n d O p e r a t i o n M a n u a l
Key Station Slope
7 [Fmin - 750 MHz],
X
8 [Fmin - 870 MHz]
12 [Fmin - 750 MHz,
H
870 MHz]
6 [Fmin - 870 MHz,
L
J-split Silicon only]
Key Customer Specific
X Standard
- -
Key Housing Size
X Standard
D Deep lid for status monitor
N None (Electronics only)
Key Housing Finish
X Standard
C Chromate
S Chromate w/ SS plugs
P Epoxy
Key
E Ergonomics
Key
X
- - -
Key Power Supply
X Standard
P Power Factor Correction
Key Voltage Surge Protector
X Surge Arrestor
C FTEC; Crowbar
Key Overcurrent Protection
X 20A Auto Fuse
S Shunt
Key Status Monitoring
X None
S LL-BLE-HMS
Key Ingress Switching
B Ingress Control Switch
X None
Ergonomics
Reserved
Reserved
-