Paper Jams Within Fuser Unit - Toshiba e-studio182 Operator's Manual

6 TROUBLESHOOTING
4
Open the transport guide of the paper feeding area and check if any
paper is jammed under this guide. Clear the paper if there is any.
5
Close the transfer unit and the side cover.

Paper jams within fuser unit

Be careful not to let your fingers be caught between the equipment and the side cover.
This could injure you.
Do not touch the fuser unit or the metal part around the unit.
This could cause burns, or injury to your hands if you touch the inside of the equipment.
1
Open the side cover, and then lay down the transfer unit. Then
press down the two fuser pressure release levers (green) until they
come to a stop.
Press down the levers fully until they stop.
188 Paper Jams