System (2/2); Function - Panasonic AK-HRP200G Operating Instructions Manual

ROP.menu.setting.
(continued)
SYSTEM.(2/2)
→＊＊ ＳＹＳＴＥＭ （ ２／２ ） ＊＊
ＨＤ Ｈ ＰＨＡＳＥ
ＳＤ Ｈ ＰＨＡＳＥ
ＳＤ－ＨＤ Ｖ
ＭＩＣ１
ＭＩＣ２
Item Display
HD.H.PHASE
1099.(59.94.Hz)
1319.(50Hz)
SD.H.PHASE
857.(59.94Hz)
863.(50Hz)
SD-HD.V
ADVANCE
0H_SD_DLAY.
MIC1.GAIN
22
０
０
０Ｈ
ＧＡＩＮ ＡＭＰ
６０dB ０dB
６０dB ０dB
( indicates factory default settings.)

Function

-1099 Adjusts the horizontal phase of
‫׀‬ HD SD video for the genlock
0 reference phase.
‫׀‬
-1319
‫׀‬
0
‫׀‬
-857 Adjusts SD horizontal sync
‫׀‬ phase.
0
‫׀‬
-863
‫׀‬
0
‫׀‬
0H Set the vertical phase of the
HDTV output in relation to the
SDTV output.
0H:
Sets the vertical phase to the
same phase.
ADVANCE:
When the field frequency is
59.94 Hz, the phase advance
is 90H.
When the field frequency is 50
Hz, the phase advance is 75H.
0H_SD_DLAY:
The SDTV signals are delayed
and set in-phase with the
HDTV signals.
• When the setting of this item
is set to "0H" or "ADVANCE"
while the field frequency is
50 Hz, images in SD format
are delayed by 1 frame + 75
lines only when letterbox is
selected for DOWNCONVERT
MODE.
For the relationship with the
sync phase, refer to Operating
Instructions <Operations and
Settings> of AK-HCU200.
ADVANCE:
. 59.94Hz→90H
. 50Hz→75H
20dB Performs coarse adjustment of
40dB MIC1 gain.
60dB
Item Display
MIC1.AMP -20dB
MIC2.GAIN
MIC2.AMP -20dB
FUNCTION
→＊＊ ＦＵＮＣＴＩＯＮ ＊＊
ＡＬＣ ＬＥＢＥＬ
ＡＬＣ ＳＰＥＥＤ
ＡＬＣ ＷＩＮＤＯＷ
ＡＬＣ ＰＥＡＫ
ＡＬＣ ＲＡＮＧＥ
ＡＳＵ ＳＥＴＵＰ
ＡＳＵ ＲＥＦ ＦＩＬＥ
ＡＳＵ ＭＡＳＴＥＲ ＰＥＤ ＳＥＴ
ＡＳＵ ＦＩＬＴＥＲ
ＴＡＬＬＹ ＧＵＡＲＤ
Item Display
ALC.LEVEL
ALC.SPEED
ALC.WINDOW
ALC.PEAK
ALC.RANGE NORMAL
ASU.SETUP OUT.FULL
OUT.EASY
ASU.REF.FILE FACTORY
USER1
USER2
USER3
ASU.MASTER.
PED.SET
Function
Makes fine adjustments of the
‫׀‬
MIC1 gain.
0
‫׀‬ (in.1.dB.increments)
20dB
20dB Makes coarse adjustments of
40dB MIC2 gain.
60dB
Makes fine adjustments of MIC2
‫׀‬ gain.
0
‫׀‬ (in.1.dB.increments)
20dB
５０
１５
１
６０
ＮＯＲＭＡＬ
ＯＵＴ ＦＵＬＬ
ＦＡＣＴＯＲＹ
２．０％
ＲＥＦ
ＯＦＦ
( indicates factory default settings.)
Function
0 Adjusts the auto iris level of the
‫׀‬ lens iris.
50
‫׀‬
100
1 Sets the feedback speed of the
‫׀‬ auto iris.
15 Feedback speed drops as the
‫׀‬ numbers increase.
25
1 Sets the image detection area
‫׀‬ window for the auto iris.
4
0 Sets the ratio between the
‫׀‬
average and peak values of auto
60 iris image detection.
‫׀‬
100
Sets the correction range for
3/4 adjustments of the iris level
2/4 using the IRIS knob to move the
1/4 iris lever <IRIS ( )> in auto
iris mode.
Selects the auto setup mode
setting.
Selects the file to be referenced
when auto setup has been
started.
0.0% Sets the position where the
‫׀‬ master pedestal is to be
2.0% converged when auto setup is
‫׀‬ started.
7.5%