SL WASH 180 RGBW LED Luminaire Installation & User’s Manual IMPORTANT INFORMATION Warnings and Notices When using electrical equipment, basic safety precautions should always be followed including the following: a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. b. Do not use outdoors.
INSTALLATION AND SET UP Power Requirements ................................... 6 AC Power Operation................................6 Connecting Power..................................6 Connecting SL WASH 180 RGBW LED Luminaires to AC Power.................. 7 Connecting to the DMX512 Network............................8 Mounting Luminaire ................................... 9 Truss / Hanging Applications ............................. 9 Floor Mounting ...................................
SL WASH 180 RGBW LED Luminaire Installation & User’s Manual CLEANING AND CARE Special Cleaning and Care Instructions ............................ 36 Front Lens Cleaning.................................. 36 Service and Maintenance ................................36 TECHNICAL SPECIFICATIONS Operational Specifications................................ 37 Luminaire Dimensions................................38 Sh wline...
Unpack & Quick Start Guide Neutrik PowerCon® AC Input Connector SL WASH 180 RGBW LED Luminaire 3. Accessories Contact your Authorized Showline Dealer for price and availability of all accessories for SL WASH 180 RGBW LED Luminaires. Sh wline PREFACE...
Assembly DMX512 / DMX512 / RDM Input RDM Output LCD Display / Menu System Figure 1: SL WASH 180 RGBW LED Luminaire Common Components LCD Display / Menu System Edit a Preset Edit a Chase Home (menu settings) DMX512 Addressing...
SL WASH 180 RGBW LED Luminaires to AC Power" on page • Connection from the AC output of another SL WASH 180 RGBW LED Luminaire. When using this method, it is very important not to connect any other type of equipment device.
If the unit is supplied with an AC input cable but you did not order an AC input connector, Table 2 describes how to connect power to your SL WASH 180 RGBW LED Luminaire. Field wiring of the SL WASH 180 RGBW LED Luminaire is straight forward.
DMX connector on the first SL WASH 180 RGBW LED Luminaire. Another cable runs from the other DMX connector on the first unit to a DMX connector on the next SL WASH 180 RGBW LED Luminaire (or DMX512 device to be controlled).
Truss / Hanging Applications The SL WASH 180 RGBW LED Luminaire is provided with the ability to hang via truss hooks, clamps, etc. (sold separately). Simply attach hook, clamp, etc. to the SL WASH 180 RGBW LED Luminaire enclosure assembly in the provided M10 holes.
Installation & User’s Manual OPERATION AND PROGRAMMING 1. LCD Display and Menu System The SL WASH 180 RGBW LED Luminaire’s LCD Display and Menu System provides local control for accessing the following fixture’s settings: • Presets (Standard and User Defined) •...
Figure 7: LCD Display and Menu System 3. SL WASH 180 RGBW LED Luminaire Main Menu Options Presets Presets are stored values of the luminaire's LED settings that can be recalled via the menu system or DMX. You can customize up to 31 presets via the menu system.
SL WASH 180 RGBW LED Luminaire Installation & User’s Manual Step 6. Press the Check Mark button to save the preset. You will be asked to confirm your saving operation. Step 7. The preset is now saved and can be recalled via the menu or DMX.
Anytime the fixture is locked, each PIN code will unlock all functions except the pertaining features assigned via the security level. Note: The Level 3 PIN will always unlock all functions. Sh wline SL WASH 180 RGBW LED Luminaire Main Menu Options...
Harmonize Color Calibration for more Calibration information). Select Auto of Off fan operation (see SL WASH 180 RGBW LED Luminaire DMX Fan Control Mapping for more information). Settings/Factory Default Factory default menu settings can be recalled through this menu option. You can select if you wish to overwrite the user edited preset and chases.
Note: When the fixture is powered off, the Lock Fixture function will be disabled. To assign fixture power-up security refer to (see "Settings/Security" on page 13 for more information). Sh wline SL WASH 180 RGBW LED Luminaire Main Menu Options...
SL WASH 180 RGBW LED Luminaire Installation & User’s Manual Password (PassPIN) The Password menu item will display an Enter PassPIN dialog box. Use the Up Down Left Right buttons to enter a PIN code matching the codes assigned in the Settings/Security menu to toggle the current security level.
PL_Curve * DMX Value DMX Value *PL Curve follows the dimming curve of Philips Selecon PL series LED luminaries. S_Curve Square Curve DMX Value DMX Value Figure 8: SL WASH 180 RGBW LED Luminaire Dimmer Curves Sh wline Harmonize Color Calibration...
6. Master / Slave Operational Mode The Master / Slave Operational Mode allows one SL WASH 180 RGBW LED Luminaire to act as the "Master" unit and all other connected units are controlled by this unit. When a unit is set to "Slave" mode, it will only listen to and follow any commands sent from a "Master"...
1. SL WASH 180 RGBW LED Luminaire DMX Mapping 16-Bit Mode Table 12 provides DMX channel mapping of all DMX512 control values when the SL WASH 180 RGBW LED Luminaire is in 16-bit DMX512 mode (as set by the luminaire’s menu system).
Page 22
SL WASH 180 RGBW LED Luminaire Installation & User’s Manual Table 12: SL WASH 180 RGBW LED Luminaire DMX Channel Mapping (16-Bit Mode) Select presets, variable color filters or chases as follows: CF_0_Color OFF DMX 69 - 70 CF_1_White 10000K DMX 71 - 72...
Installation & User’s Manual 8-Bit Mode Table 13 provides DMX channel mapping of all DMX512 control values when the SL WASH 180 RGBW LED Luminaire is in 8-bit DMX512 mode (as set by the luminaire’s menu system). Table 13: SL WASH 180 RGBW LED Luminaire DMX Channel Mapping (8-Bit Mode)
Page 25
SL WASH 180 RGBW LED Luminaire Installation & User’s Manual Table 13: SL WASH 180 RGBW LED Luminaire DMX Channel Mapping (8-Bit Mode) Select presets, variable color filters or chases as follows: CF_0_Color OFF DMX 69 - 70 CF_1_White 10000K DMX 71 - 72...
Installation & User’s Manual HSIC Mode Table 14 provides DMX channel mapping of all DMX512 control values when the SL WASH 180 RGBW LED Luminaire is in HSIC (Hue, Saturation, Intensity, and Color Correction) DMX512 mode (as set by the luminaire’s menu system).
2. DMX Timing Channel Detail Timing channel control improves the timed moves of certain groups of parameters. The SL WASH 180 RGBW LED Luminaire provides timing channels in 16-bit mode (one for intensity time and one for color time) and one timing channel in 8-bit (color and intensity timing combined).
RDM PARAMETER IDS 1. SL WASH 180 RGBW LED Luminaire RDM Parameter IDs The following tables outline and describe all the RDM parameters IDs associated with SL WASH 180 RGBW LED Luminaires. • Table 16, "SL WASH 180 RGBW LED Luminaire RDM Product Parameters IDs"...
Page 36
PRESET_PLAYBACK 0x1031 Table 19: SL WASH 180 RGBW LED Luminaire RDM Manufacturer Status IDs Manufacturer Specific messages are in the range of 0x8000 - 0xFFDF. Each Manufacturer-specific Status ID shall have a unique meaning, which shall be consistent across all products having a given Manufacturer ID. See Table B-2, ANSI E1.20- 2010.
SL WASH 180 RGBW LED Luminaire. These types of cleaners or solvents can permanently damage the optics or housings of the fixture. If you have any questions regarding the use or care of your SL WASH 180 RGBW LED Luminaire, please contact Showline technical support or your local Authorized Dealer.
SL WASH 180 RGBW LED Luminaire Installation & User’s Manual 2. Luminaire Dimensions 113 mm / 4.4 in. 209 mm / 8.2 in. 85 mm / 3.3 in. 80 mm / 3.1 in. 212 mm / 8.3 in. Front View...