NEC SV8100 User Manual page 2

Use the Exit button to return your phone's display to normal mode after using
the soft key menus.
Function keys (12 or 24)
Programmable keys used for a variety of telephone features, eg: lines, other
extensions (hotline), headset.
Keypad
As on any phone, dialing digits 0 – 9, #, *.
Recall
To move quickly between calls, use this key to disconnect one call and immediately
get dial tone.
Feature
Used occasionally to access telephone feature setup.
Answer
Press to answer a second call ringing at your phone. First call will be put on hold
automatically; to return to first call, press flashing line key.
Mic
Press to turn microphone on (key will light up) or off. You must turn on the
microphone in order to respond handsfree to a speakerphone call. While on a handset
or headset call, press Mic to mute microphone on handset or headset (key will blink);
press again to cancel mute.
Menu
Press to access other phone settings including ring volume, offhook ringing, backlight,
etc.
Directional Pad (large round multi-directional key)
Press left, right, top or bottom to access Redial, Directory, Volume Control (of handset,
speaker, ringing, and brightness of LCD display). Press center button for Enter.
Hold
Press to put outside call on hold. Call will flash on line appearance key and can be
picked up by any other user.
Transfer
Press to transfer a call to a co-worker.
Speaker
Press to access your phone's hands-free capability. Lights up when in hands-free
mode.
2