Dial By Name Using Station Speed Dialing; To Save A Name & Number To Station Speed Dialing - NEC DT310 User Manual

Dial By Name Using Station Speed
Dialing
To initiate
Press the Directory key.
Enter up to the first four characters of a name using
the keypad.
Press the UP or DOWN key to start the search.
The name and the number are shown on the LCD.
If more than one name matches the letters entered,
scroll through the matches with the UP or DOWN
soft key.
If no matches are found, the first System Speed
Dial buffer will be displayed.
Press the Speaker key, or select a Line/Trunk key
to dial the selected number
To Save a Name & Number to
Station Speed Dialing
To register Name & Number
Press the Directory key.
Press the UP or DOWN key to select buffer to be
programmed.
Press the Feature key.
Using the key pad enter the name.
Press the Feature key.
Using the key pad enter the number.
Note: When entering an outside number you must
include the Trunk access Code (i.e., 9)
followed by area code and number. For a
name the first 7 characters plus * for names
longer than 8 characters and the * plus last 7
digits of a number longer than 8 digits.
Example: Name display programmed is
ABCDEFGHI button will show ABCDEFG*.
Number display programmed is 123456789
button will show *3456789.
34